Prix FOB
Obtenir le dernier prix2500 ~ 3500 USD / Set
|1 Set Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
2500 ~ 3500 USD / Set Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
2500 per Set
Commande minimale:
1 Set
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
100 Set per Week
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter Wang
Xingtai, Hebei
First, the
characteristics of the plunger type mortar pump spraying
machine
Piston mortar
pump ZCP**0 sprayer is my company in recent years development the
development of a new generation of mortar pump, feeding and
spraying of new products. The machine is working pressure, large
flow, high efficiency, convenient operation, safe and reliable,
flexible movement, compact structure, easy to maintenance warranty
and other characteristics.
Two, the use of
mortar pump spray coating machine
1,
in the construction project, for horizontal vertical transport
mortar or large area spraying.
2,
in the chemical industry and the paper industry, the transport of
raw materials and waste materials.
3,
in the thermal power plant used to transport coal ash
slurry.
4,
in the national defense and civil air defense engineering, mine
tunnel construction for grouting revetment.
5,
in the highway pavement maintenance, used for cement road collapse
of the teeth will be filled.
6,
in the construction of prestressed construction, for the expansion
of mortar injection, etc..
7,
in the water conservancy project, used to reinforce the
dam.
8,
in metallurgy, iron and steel and other industries for the
maintenance of blast furnace and other equipment of the slurry
infusion.
Three, mortar
conveying pump technical parameters
One
Maximum
transport capacity
4m3/h
Two
Maximum working
pressure
5MPa
Three
Horizontal
transmission distance of mortar
*0m
Four
Vertical
transmission distance of mortar
*0m
Five
Maximum
transport mortar ratio
1:2
Six
Host
power
Host 5.5KW+ air
compressor 3KW+ vibration 0.5KW
Seven
Weight
**0Kg
Eight
Exterior size
(L * w * h)
***0 * *5 *
***0
Four, mortar
ratio
Mortar
conveying and spraying materials should be used in sand 1mm about
the quality of sand accounted for *0% of the total amount of sand
above the maximum grain diameter is less than 8mm, heavy mortar
value not less than *0cm and stir uniform, slump **0 or
so.
The
proportion of working mortar can be in accordance with the
following table:
mix
proportion
1:2.5 (volume
ratio) or 1:3.*4:0.*7 (mass ratio)
Name
Volume number
(M3)
Quality
(kg)
cement
Zero point
three six six four
Zero point four
three seven six
Clean
sand
Zero point nine
one six
One
point four one nine eight
water
Zero point
three four seven
Zero point
three four seven
Five. The
structure of the plunger type mortar pump spraying
machine
Cement mortar
pump is composed of motor, reducer, pump, air compressor, electric
appliance, rack and other components.
Six. The
structure and principle of the plunger type mortar pump spraying
machine
Mortar pump by
the motor through the belt pulley and the gearbox drives the
eccentric wheel and the eccentric wheel driving connecting rod of
the piston shaft, a connecting into the cylinder, again by the
piston on the connecting rod through the connecting rod and the
piston for reciprocating motion, when the piston forward nowadays
ball rooms and front ball room closed, the ball room and before the
ball room of suction and discharge, return ball room before and
after the feeding ball valve chamber open suction and discharge,
repeated the mortar with the piston inhaled output cylinder,
feeding and spraying.
7
lubrication and operation precautions
The
gear box should keep the lubricating oil in normal lubrication, and
the lubricating oil should be checked by the gear oil, the
eccentric wheel and the bearing part.
1,
mortar pump use and precautions
(1)
ensure that the machine is stable and the level before starting.
(2) check if the gear box is filled with lubricating
oil.
(3)
to check whether the pipeline and pump flow.
(4)
to check whether the motor is connected to ground
rotation.
2,
start
(1)
the hopper into the water to start pumping clean wet
pipe.
(2)
by using a pump pressure conveying lime cream or water mud as
piping lubrication, and then into a thin mortar (consistency in
more than **0). Finally, in increase to the desired consistency (to
prevent pipe blockage, before using the new pipeline is more
important.
3,
the work should pay attention to matters
(1)
pay attention to the motor and the work of the pump is working
properly, and found that any accident must be immediately shut down
to open the discharge valve, no pressure to remove the
trouble.
(2)
after mixing the mortar pump should be before the consistency test,
the work should not continue to stir the mortar.
(3)
down more than *0 minutes, or long time shutdown, should
immediately pump water to clean up their own inside the pump and
the pipe until the clean, such as more than the time should be
every **5 minutes start a pump, to ease the mortar precipitation
caused by the blockage.
1,
construction organization
When
construction, each class can arrange 4 people to cooperate, and to
ensure that the floor and the ground staff can quickly communicate
through the appropriate way. If you need to temporarily shut down,
the time can not be more than 5 minutes.
Construction
organization equipment
Job
title
The
number of
Job
content
Technical team
leader
One
Construction
organization, processing equipment and technical problems,
inspection pipeline, coordination equipment operation in the
construction site construction arrangements.
Mixer
operator
One
Preparation of
mortar pump.
Mortar pump
operator
One
Mortar pump
operation and monitoring. Vibration sieve feed
control.
floor
supervisor
One
After the
mortar pump reaches the floor, is responsible for the shunt
management.
2,
cloth tube method
The
mortar conveying pipe can be used 2 pipe or steel pipe. Hose
arrangement is more flexible, quick and easy installation, but the
pumping resistance larger hose prices are high, bearing capacity is
limited, general and applicable to pumping at close range (less
than *0m vertical distance, horizontal distance of *0m within).
Steel pipe pumping resistance is small, the price is relatively
low, but the installation is more complex.
The
correct laying and arrangement of pipelines is a prerequisite to
ensure the failure free pumping mortar, and the following
principles should be followed in the pipe laying:
(1)
to select the pipeline route, to minimize the length of the
pipeline, to reduce the number of turning.
(2)
the pipe must be fixed and fixed, and should be installed in the
place where it is easy to reach, so that it can be easily assembled
and disassembled.
(3)
the horizontal section is not easy too long, more than *0m, try
using oblique arrangement to avoid mortar precipitation and
segregation.
(4)
the hose conveying, cloth control means turning radius is not less
than 1m, to ensure ease of pipeline.
9
trouble and elimination
fault
Cause of
occurrence
Elimination
method
Smoke is not on
mortar or reduce mortar
Wear resistant
sealing ball and valve seal is not strict or ball valve stuck.Smoke
is not on mortar or reduce mortar
Wear resistant
sealing ball and valve seal is not strict or ball valve
stuck.
Sand suction by
precipitation.
Slurry
interrupted or loose packing.
Check the
sealing performance of the wear resistant seal valve to replace the
ball or seat.
Remove ball
valve clean.
Clean the
suction pipe and the suction port.
Keep continuous
feeding and packing seal.
Piston
leakage
Piston
wear.
The
piston pressure plate loosening.
Drum
wear.
Replace
piston.
Tighten the
pressure plate.
The
replacement of steel drums.
Catheter
blockage
The
mortar is too thick or uneven stirring.
A
mortar gravel, debris, sand, lump.
Not
cleaned after the last use.
Long time after
shutdown is not cleaned.
When he began
to work with lime paste lubrication.
In
accordance with the provisions of the consistency of uniform
mixing.
Sand
screen.
Every time
should be washed clean.
The
dust out of water.
Before working
with lime paste lubrication.
Ten, detailed
operation steps
(1)
to (2) with mortar or lime grease into the hopper remember (diffuse
ball) Note: can discharge pipe raised higher than the hopper can
reduce the usage of the mortar. (3) adding a small amount of mortar
repeated boot make mortar suction ball chamber can not be
evacuated, repeated 3 to 5 times vaginal discharge hopper
irrigation can be full of a lot of discharge, the data must first
open air compressor air blowing
QA
Users in the
normal use of the maintenance of conditions, from the day of
delivery from three months of internal product quality problems and
the damage occurred or not working properly, returns to the factory
is responsible for free repair (except wearing parts), due to the
use of improper maintenance or does not comply with the notice
items and the rules for safe operation failed, man-made damage by
the user is responsible for.
Xingtai Wang
Machinery Equipment Manufacturing Co., Ltd.
Address: Hebei province Xingtai city Renxian County West Industrial
Zone
Telephone: ***********3
Fax: ***********3
Cell phone: **********5
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 2500 ~ 3500 / Set Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 2500 per Set |
| Commande minimale: | 1 Set |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | 100 Set per Week |
| Payment Type: | L/C, T/T |
| Groupe de produits : | xinguoyang |
