Prix FOB
Obtenir le dernier prix9.8 ~ 10.5 /
|100 Piece Minimum Order
Pays:
China
N ° de modèle:
CN-D63
Prix FOB:
9.8 ~ 10.5 / Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
9.8
Commande minimale:
100 Piece
Packaging Detail:
10pcs in one carton, size for it:50*47*43cm
Heure de livraison:
15-20days after receipt of your deposit
Capacité de Fournir:
10000 Piece per Week
Payment Type:
T/T, L/C, Western Union, PayPal
Groupe de produits :
Personne àcontacter danqing
Shaoxing, Zhejiang
heat Element: heating element with thermostat, Heating element are made of non-corrosive material
Foot: A special foot with clamp that enables working at any location.
temperature rang:****0degree
voltage rang:**0±*5v
power:**0w *0HZ
specification:*0mm *5mm *2mm *0mm *0mm *3mm
welding materail:ppr pe pp-c
OD (mm) |
Heating Time (s) |
Depth (mm) |
Cooling time(min) |
*0 |
5 |
*4 |
3 |
*5 |
7 |
*6 |
3 |
*2 |
8 |
*0 |
4 |
*0 |
*2 |
*1 |
4 |
*0 |
*8 |
*2.5 |
5 |
*3 |
*4 |
*4 |
6 |
Using
1 Place the machine on the support. Fix and tight the moulds with the wrench .Please set the smaller moulds in front usually.
2 Turn on power . red indicators show the machine is heating. Red indicator does not shine, the machine has stopped heating. And it is the time for working.
Caution: Do not plug in without ground wire
3 Cut the pipe. Push the pipe and fitting into the moulds for some time (See the table). Pull them out and insert the depth needed steadily .Please do not screw the pipes and fittings
Pays: | China |
N ° de modèle: | CN-D63 |
Prix FOB: | 9.8 ~ 10.5 / Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | 9.8 |
Commande minimale: | 100 Piece |
Packaging Detail: | 10pcs in one carton, size for it:50*47*43cm |
Heure de livraison: | 15-20days after receipt of your deposit |
Capacité de Fournir: | 10000 Piece per Week |
Payment Type: | T/T, L/C, Western Union, PayPal |
Groupe de produits : | plastic pipe welding machine |