Prix FOB
Obtenir le dernier prix1000 /
|1 Minimum Order
Pays:
China
N ° de modèle:
PET preform mould, preform mould
Prix FOB:
1000 / Obtenir le dernier prix
Localité:
huangyan
Prix de commande minimale:
1000
Commande minimale:
1
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
1
Payment Type:
-
Groupe de produits :
China
Personne àcontacter Mr. steven
mold center, huangyan, zhejiang
PET mould, preform mould
TW Molder is a business specialized in preform mould, pet preform
mould, bottle preform mould, jar preform moulf and injection
preform mould manufacture
-Preform mould ranges from 1 cavity up to *8 cavities
-Advanced structure is designed consulting European preform
mould.
-Mould cavity and Core are made of steel imported from Sweden(
ASSAB S**6) or Germany (DIN 1.***6)with fine polishing, high
hardness( HRC**-HRC*2) and anti-corrosion to get mould's high
precision and good quality.
-Pneumatic drive the nozzle pin(imported from Japan) for
simultaneous high-speed open and close actions.
-Patent designed rectifying system is adopted to lessen the
possible preform thickness problem happening during production.
-Special designed water hoses eliminate leakage and water marks on
preform.
-Moldflow analysis reduce AA level.
-International standard screw neck, imported nitrided steel with
high hardness and long life time.
-Long using life over 2.5 million times of injection cycle for our
preform mould.
Â
Preform Mould Catagories:
Long tail
Short tail
Pneumatic Valve
Preform Mould Configuration:
I.Off-center Adjustment System
Off-center adjustment system can make the error of preform's wall
thickness less than 0.*5mm. This system does not affect the
lifetime of mould;
II.Self-lock System
International advanced bi-awls fixed orientation self-locked
structure has been adopted by our preform mould.
III.Cooling System
All the water Channels in the mold's each inner part, which make
the cycle time short enough. And all the cooling channels have been
specially treated to prevent them from jam;
IV.Heating System
Double Heating System can ensure that the impact of heating is good
and quality control is credible. The Heating Band unit makes
nozzles be with invariable temperature. The Heater Unit is used to
heat the hot runner plate with long using life and powerful heating
capacity.Heating band inside our preform mould is "hotset" imported
from Germany.
V.Hot Runner System
The preform mould adopt Pin-valve type Hot Runner System, such hot
runner system can reduce mould's each part's wear & tear and
maintenance cost, and also save *0%~*5% electric energy;
VI.Hydraulic Ejecting System
The perform-doffing success ratio has achieved firm endurance and
the whole perform ejecting process will become much quieter.
Preform mould spare parts and after-sale services:
Each set of PET preform mold undergoes strict mould trials and
preform mould trial video will be sent to customer for confirmation
before shipping from factory and attaches full set of parameter
that is recorded depending on their own and sole serial number.
Together with the PET preform mould, full set of spare parts will
be supplied for free to keep mould normal operation . In the use of
the PET preform mould, Topworks provides adequate spare part to any
request and Topworks service department are very willing to provide
technical support immediately for any possible request in any
time,also we could send our engineers overseas for mould installing
and adjusting.
| Pays: | China |
| N ° de modèle: | PET preform mould, preform mould |
| Prix FOB: | 1000 / Obtenir le dernier prix |
| Localité: | huangyan |
| Prix de commande minimale: | 1000 |
| Commande minimale: | 1 |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | 1 |
| Payment Type: | - |
| Groupe de produits : | preform mould |
