Prix FOB
Obtenir le dernier prix60000 ~ 70000 USD / Unit
|1 Unit Minimum Order
Pays:
China
N ° de modèle:
HY-A6
Prix FOB:
60000 ~ 70000 USD / Unit Obtenir le dernier prix
Localité:
taizhou
Prix de commande minimale:
60000 per Unit
Commande minimale:
1 Unit
Packaging Detail:
FILM AND WOODEN PACKAGE SUITABLE FOR SEA JOURNEY
Heure de livraison:
50
Capacité de Fournir:
20 Unit per Month
Payment Type:
D/P, D/A, T/T
Groupe de produits :
Personne à contacter Mr. Allen
Jin qing Town, Ningbo, Zhejiang
HY-A6 is the fastest liner blow molding machine in mainland of
China by now. Its baking tunnel is separated from the blow station
so that time for mold opening is shortened with a result of speedy
blowing and high output, damage to machine is lessened so as to
keep reliable performance and prolong service life, as well as
machine runs more smoothly and steadily.
HY-A6 is controlled by PLC. The whole process from preform feeding
to bottle discharging is completed automatically with advantages of
labor saving and no pollution. HY-A6 consists of three main parts:
preform loading system, Heater channel & blow station.
MACHINE FEATURES:
1.  Machine use of advanced PLC control system
,  stable in performance, automatic preform feeding
. Â
2.  Strong penetrability and good and swift
distribution of the heat by letting the bottles rotate by itself
and revolute in the rails simultaneously in the infrared
preheater
3.  High adjustability to enable the preheater to
preheat preforms in shapes by adjusting the light tube and the
length of the reflecting board in the preheating area, and eternal
temperature in the preheater with an automatic thermostatic
apparatus.
4.   High safeties with security
automatic-locking apparatus in each mechanical action, which will
make the procedures turn into a state of safety in case of a
breakdown in certain procedure.
5.    No contamination and low noise with
the air cylinder to drive the action instead of the oil
           Â
pump. Â
6.   Air route
design is divide into two parts ,
7.  Ideal effect of the chilling with the chilling
system
8.  Low rejection rate: less than 0.3percent
Â
| Â | ITEM | Â UNIT | HY-A6 |
|
Machine  |
Clamping force | Kn | ***0 |
| Clamping stroke | mm | **0 | |
| Stretching stroke | mm | **0 | |
| Bottom stroke | mm | *0 | |
| Number of cavities | Â Cavity | 6 | |
|
 Container  |
Max. container volume | ltr | 2.0L |
| Max Neck diameter | mm | *0 | |
| Max .container diameter | mm | **0 | |
| Max. container height | mm | **0 | |
| Theoretical output | bph | ********0 | |
|
 Electrical System  |
Total power | KW | *0 |
| Heating power | KW | *8 | |
| Power supply | Â Â Â Â Â Â Â Â Â Â Â Â **0V/*0HZ | ||
| Power consumption | KW/H | 7(0.5L) | |
|
 Air system |
Operating pressure | Mpa | 0.8 |
| Low pressure consumption | L/min | ***0¼†0.5L¼€° | |
| Blowing pressure | Mpa | 3.0 | |
| High pressure consumption | L/min | ***0¼†0.5L¼€° | |
| Machine size | Main machine(L€â€W€â€H) | cm | **0***3***5 |
| Preform auto-loader | cm | **5**5***5 | |
| Machine weight | Kg | ***0 | |
| Pays: | China |
| N ° de modèle: | HY-A6 |
| Prix FOB: | 60000 ~ 70000 / Unit Obtenir le dernier prix |
| Localité: | taizhou |
| Prix de commande minimale: | 60000 per Unit |
| Commande minimale: | 1 Unit |
| Packaging Detail: | FILM AND WOODEN PACKAGE SUITABLE FOR SEA JOURNEY |
| Heure de livraison: | 50 |
| Capacité de Fournir: | 20 Unit per Month |
| Payment Type: | D/P, D/A, T/T |
| Groupe de produits : | automatic blow molding machine |
