Embossed Solid PC Sheet
PC embossed sheet:light weight to
installation,high light transmission,good weather,impact,fire
resistance,easy drilling
ÂÂ
|
PC embossed  sheet be
formed with complete new polycarbonate sheet raw
materials offered by Bayer Makrolon,GE lexan
etc,contained anti-ultraviolet absorbent,adopting
European co-extrusionand technology and
equipments.
|
Specification of pc
embossed sheet:
PC embossed sheet application
*-Day lighting for building roofing/wall;
*-Decorating,advertising, Display Design;
*-Sound insulation wall for expressway, environment;
*-Roofing/wall for agricultrure greenhouse,garden, plant and
cultivate;
*-Part of machine,electron, household electrical appliances
equipment.
PC embossed sheet properties
Light transmission: Fine light transmitting rate approve to
*0~ *5%.
Weather resistance: With anti-UV weather treatment on the
surface, it can prevent the resin from fatigue and yellowing
caused by UV. The anti-UV agent on the surface can change the
UV absorbed by chemical bond into visible light, and finely
stabilize the photosynthesis of plants.
Impact resistance: With the strength as **0 times of the
ordinary glass,*0 times as the PMMA sheet, it has less risk
of breakage
Fire retardant: Fire retardency is up to B2 level(based on
National GB******8 testing, without flame or toxic gas).
Temperature toleration: Without deformation within the
temperature range from**0°C to ***0°C.
Sound insulation: It is the best transparent materials for
sound insulation engineerings as
expressways,factories,etc..
Portability: Easy for handling and drilling,wo’t be
breakage whencutting, simple and easy be treated in
using.
Notice When transporting, storing,installation:
· Keep PC panels away from wet cement surface or any
alkaline/acid base materials.
· Keep frame clean and jointing groove flat and smooth.
· Use neutral glass cement and right gasket. Never use
gasket of PVC material.
· Use electrical tools(tungsten carbide saw)to cut,stabilize
PC panels to prevent their vibration.
· Choose right thickness of PC panels,allow flexure
radius.
· Remain space for expanding,pay attention to inserting
depth.
· In case that marks have to be made before cutting,try to
mark on protective film;If the marks must be made directly
on polycarbonate panels,use wax crayon instead of any
sharp tool to mark.
· Never pill off protective films until installation is
completed.
· Drilling and fixed:
If use self –drilling screws for fixing,the hole must be
pre-drilled,the aperture should be 1,5 times larger than the
diamenter of the screw,it is suggested to use roof hook for
fixing.Do not tighten the screw strongly,otherwise stress
will arise,and local crack on the sheet surface will
appear.
![Multiwall sheet "polycarbonate"](https://imgusr.tradekey.com/p-B8724067-20140407003059/multiwall-sheet-amp-amp-amp-quot-polycarbonate-amp-amp-amp-quot.jpg "Multiwall sheet "polycarbonate"")
