Prix FOB
Obtenir le dernier prix6.2 ~ 12.98 / Kilogram
|100 Kilogram Minimum Order
Pays:
China
N ° de modèle:
HY-901 silicone
Prix FOB:
6.2 ~ 12.98 / Kilogram Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
6.2 per Kilogram
Commande minimale:
100 Kilogram
Packaging Detail:
25kg/drum and 200kg/drum
Heure de livraison:
within 5 days after payment confirmed in our bank.
Capacité de Fournir:
8000 Kilogram per Day
Payment Type:
T/T, L/C, Western Union, PayPal
Groupe de produits :
Personne àcontacter Ms. JoJo
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Long Gang district, Shenzhen, Guangdong
Pad printing silicone for plastic toys
manufacturer
Description
of pad printing
silicone:
The product with the advantages of high temperature resistance, abrasion resistance, good printing effect, etc. , which made of top-quality raw material due to adding American Teflon high-temperature resistance new material, is processed through high-temperature machining. The product can be used to make high-quality silicone tampo print pad, which is mainly applicable to plastic toys, electroplating products, electronic toys, trademarks and irregular pattern printing. The silicone rubber pad is a carrier which transfer printing the patterns on the steel plate onto the toy products' surface.
Â
Standard
Datasheet:
Â
|
Model |
Appearance |
Viscosity (cps) |
Hardness (A°) |
Tensile strength (Mpa) |
Tear strength (KN/m) |
Elongation (%) |
Mixing ratio(%) |
Pot life(H) |
Demould time(H) |
|
901 |
red / yellow |
≤33000 |
28±2 |
≥3.0 |
≥20 |
≥360 |
2~3 |
0.5 |
2~4 |
Â
Â
Operation Instruction for Print silicone rubberÂ
1.Fully clean the prepared mold and dry the mold with an air gun(also you can dry it by wiping it with a clean cloth).
2.Spray some release agent on the surface of the mold. Â Â Â Â Â Â Â Â Â Â Â
3.The ratio of silicone an silicone oil depends on actual demands. If you need soft printing pad, then you could add more silicone oil; Otherwise you can add no or less. Normally, The hardness range  from 15 A° to 25 A° is appropriate. Â
4. Do not add too much
silicone oil, it will ruin the silicone
pad. Â
Â
| Pays: | China |
| N ° de modèle: | HY-901 silicone |
| Prix FOB: | 6.2 ~ 12.98 / Kilogram Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 6.2 per Kilogram |
| Commande minimale: | 100 Kilogram |
| Packaging Detail: | 25kg/drum and 200kg/drum |
| Heure de livraison: | within 5 days after payment confirmed in our bank. |
| Capacité de Fournir: | 8000 Kilogram per Day |
| Payment Type: | T/T, L/C, Western Union, PayPal |
| Groupe de produits : | rtv-2 silicone rubber for pad printing |
