Prix FOB
Obtenir le dernier prix10.23 ~ 15.98 / Kilogram ( Negotiable )
|200 Kilogram Minimum Order
Pays:
China
N ° de modèle:
HY912
Prix FOB:
10.23 ~ 15.98 / Kilogram ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
10.23 per Kilogram
Commande minimale:
200 Kilogram
Packaging Detail:
20kg/drum, 25kg/drum and 200kg/drum
Heure de livraison:
within 3 days after payment confirmed in our bank.
Capacité de Fournir:
8 Ton per Day
Payment Type:
Western Union, L/C, T/T
Groupe de produits :
Personne àcontacter Ms. Kitty
Building A, No.3, Hongling First Road, Liulian Shibi, Pingdi Street, Shenzhen, Guangdong
Applications of pad printing silicon rubber
Pad printing silicon rubber is specially designed for making printing pads . It is mainly used for printing irregular patterns of plastic toys, electroplating products, electronic toys, trademarks, etc.
Â
Operation instruction for pad printing silicon
1. Wash and clean molds with detergents, dry the molds and use an air gun if necessary, and apply a film of mold release.
Â
2. Determine the normal proportion of pad printing silicon and silicon oil on the basis of customer requirements. Add more silicon oils if a larger area of printed pattern and therefore soft rubber head is needed by the customer. Otherwise, add no or less silicon oil for better hardness. For normal pad printing rubber head, hardness between *5 A°***5A°will be appropriate. If excessive amount of silicon oil is added, the number of printing will be limited by an extremely soft rubber head, and the molecular weight of silicon of however supreme quality will be destroyed by silicon oil, and therefore, the phenomenon of compromised resistance to abrasion, solvent and aging.
Â
3. The normal proportion is as follows: **0g silicon admixed with *0g silicon oil for a hardness of *0 A° will be suitable for pad printing for alloy toy cars and products with small patterns and contact area. If larger pressure contact surface or soft rubber head is required, the silicon and silicon oil proportion can be adjusted to **0:*0, **0:*0 and so on. Remember, the more silicon oil is added, the softer the rubber head will be, and the number of pad printing, resistance to abrasion and solvent will be undermined, and hence, heightened cost and more material waste.
Â
4. Admixture amount of curing agent and chemical reaction of silicon: e.g., mix **0g of silicon with *0g of silicon oil, after they are sufficiently and evenly mixed, add curing agent as per 2% of the total weight of silicon and silicon oil, mix again for **3 minutes before exhausting. Generally exhausting duration can not exceed *0 minutes; otherwise, the silicon will harden quickly to affect the quality of molding.
Â
5 Any more information , please feel free to contact Kity :
TEL: ***************9Â Â Â Â Â Â
FAX: ***************0
MOBILE:**************5
G-mail: kity*****1(AT)gmail(DOT)com
MSN: kityszrl (AT)hotmail (DOT)com
| Pays: | China |
| N ° de modèle: | HY912 |
| Prix FOB: | 10.23 ~ 15.98 / Kilogram ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 10.23 per Kilogram |
| Commande minimale: | 200 Kilogram |
| Packaging Detail: | 20kg/drum, 25kg/drum and 200kg/drum |
| Heure de livraison: | within 3 days after payment confirmed in our bank. |
| Capacité de Fournir: | 8 Ton per Day |
| Payment Type: | Western Union, L/C, T/T |
| Groupe de produits : | pad printing silicon rubber |
