Prix FOB
Obtenir le dernier prix300 USD / Set
|100 Set Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
300 USD / Set Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
300 per Set
Commande minimale:
100 Set
Packaging Detail:
cartoon
Heure de livraison:
15 days
Capacité de Fournir:
5000 Set per Month
Payment Type:
T/T, L/C
Groupe de produits :
-
Personne àcontacter Mr. Norman
135 Xingang West Road, Guangzhou, Guangdong
Specifications and Parameters
II. Under the nominal recommended flow, the oxygen concentration in
the product gas is *3%±3% (V/V); when a back pressure of 7kPa is
applied, the maximum recommended flow rate should change within
±*0%.
III. There is a pressure release device in the humidification
bottle. The pressure release value is *0±2kpa.
IV. Normal operating conditions:
1. Ambient temperature: *0℃
2. Relative humidity: ≤*0%
3. Air pressure range: *6 kPa **6 kPa
4. Power: AC**0V/*0Hz
V. Oxygen concentration: *3%± V/V
VI. The noise of medical oxygen concentrator should be ≤*0dB (A)
during normal operation.
VII. Alarm for abnormal oxygen concentration: The oxygen
concentration is lower than *2% five minutes after the oxygen
concentrator is turned on, with an error of ±3%.
VIII. Alarm sound:> *0dB (A)
IX. Temperature rise of medical oxygen concentrator: Under normal
working conditions, the maximum temperature of the plastic housing
is ≤*0℃, and the gas temperature at the oxygen outlet of the
oxygen concentrator is ≤*6℃.
X. Nebulizing characteristics: The working pressure should be
within the range of *0 kPa ~ **0 kPa, the gas flow should be
≥5L/min, the residual liquid volume should be ≤1mL, and the
nebulizing rate should be ≥ 0.*5 mL/min.
Pays: | China |
N ° de modèle: | - |
Prix FOB: | 300 / Set Obtenir le dernier prix |
Localité: | China |
Prix de commande minimale: | 300 per Set |
Commande minimale: | 100 Set |
Packaging Detail: | cartoon |
Heure de livraison: | 15 days |
Capacité de Fournir: | 5000 Set per Month |
Payment Type: | T/T, L/C |
Groupe de produits : | - |