Prix FOB
Obtenir le dernier prix95 ~ 100 USD / ( Negotiable )
|1 Kilogram Minimum Order
Pays:
China
N ° de modèle:
AM-020
Prix FOB:
95 ~ 100 USD / ( Negotiable ) Obtenir le dernier prix
Localité:
China ShangHai
Prix de commande minimale:
95
Commande minimale:
1 Kilogram
Packaging Detail:
1/2/20L
Heure de livraison:
15
Capacité de Fournir:
100000 Kilogram per Year
Payment Type:
T/T
Groupe de produits :
-
Personne àcontacter Mr. Xiaohui
xinjunhuan road 158, Shanghai, Shanghai
Product introduction:
AM - **0 is a common oily glass heat insulation paint, is normal
dry coating paint, its characteristic is only 3 h film hardness,
with the current water hardness is the same as the glass coating,
per liter coating construction area is much bigger than curtain
coating of water-based paint, therefore, relatively low cost, can
be coated to make the inside of the hollow energy-saving glass or
used for glass surface of the coating hardness requirement is not
high. In addition to the hardness of the paint, other performance
indicators are similar to AMS***0.
Main performance parameters:
The index name
The performance parameters
appearance
Blue liquid (single component)
The main ingredients
Nanometer insulating medium
Infrared barrier
*5% or higher
PH
7.0 + / - 0.5
The proportion of
0. 9 g/cm3
Visible light transmittance
*0% or higher
Uv barrier
*9% or higher
The temperature difference of the sunburned is reduced
****2 ℃
hardness
3 h.
adhesion
Level 0
Noise is reduced
****0 db
The thickness of the coating
4 to 5 microns
Membrane service life
*0 years
The construction area of
*0 m2 / L
Application area:
Used for building glass energy-saving renovation, reduce energy
consumption.
2. Used for building glass, solar glass, glass curtain wall,
high-end hotels, hotels, office buildings, private houses and
exhibition halls to improve comfort and energy efficiency.
3. Glass insulation and uv protection for vehicles, trains,
planes, ships, etc. to improve comfort and energy-saving
efficiency
4. For indoor glass that needs to be blocked and screened from
ultraviolet rays.
Method of use;
Clean the glass before construction and dry the surface without
water before construction.
2. Prepare the sponge scratching tool and dipping tank, and pour
the paint into the clean dipping tank. Dip the paint into the
tank and scrape it down for construction.
Matters needing attention:
1. Selection of construction surface:
Single glass: both indoor and outdoor.
Double glazing should be done outside.
2. Transportation preservation method:
The product should be kept in the shade as much as possible.
The ambient temperature is from *5 to *5 degrees for three
months.
The ambient temperature is from 5 to *5 degrees for 6 months
3. Applicable base material:
Transparent glass, transparent acrylic, transparent PET,
transparent PP
When you use it, protect it from the mouth and eyes
Packing specification;
1/2/*0 L
| Pays: | China |
| N ° de modèle: | AM-020 |
| Prix FOB: | 95 ~ 100 / ( Negotiable ) Obtenir le dernier prix |
| Localité: | China ShangHai |
| Prix de commande minimale: | 95 |
| Commande minimale: | 1 Kilogram |
| Packaging Detail: | 1/2/20L |
| Heure de livraison: | 15 |
| Capacité de Fournir: | 100000 Kilogram per Year |
| Payment Type: | T/T |
| Groupe de produits : | - |
