Prix FOB
Obtenir le dernier prix8400 ~ 9800 / Piece
|1 Piece Minimum Order
Pays:
China
N ° de modèle:
NQG-5III Type
Prix FOB:
8400 ~ 9800 / Piece Obtenir le dernier prix
Localité:
jinzhou
Prix de commande minimale:
8400 per Piece
Commande minimale:
1 Piece
Packaging Detail:
negotiable
Heure de livraison:
negotiable
Capacité de Fournir:
4 Piece per Day
Payment Type:
L/C, D/P, Money Gram, Other
Groupe de produits :
Personne àcontacter Ms. Hong
No 837, Jinzhou, Liaoning
A, applicable scope
NQG, 5 III type internal combustion cut rail machine is suitable
for cutting *3 kilo/ m ~ *5 kilo/ m rail, cutting section quality
conforms to the railway industry standard request, is the railway
works departments line overhaul, maintenance and repair work
necessary tools. It has the cutting speed, wafer wheel
utilization rate is high, the cutting section high quality,
simple operation, and convenient to move, the use of safe, widely
used, etc.
Second, the main technical parameters
1, internal combustion engines:
1) model HONDA GX**0 (Japan HONDA petrol engine)
2) speed of ***0 r/min
2, wafer wheel (shaft) :
1) spindle speed of ***0 r/min
2) specifications Φ **0 x Φ *2 x 4
3, cutting time *0 kg/m rail, acuities **0 s
4, wafer grinding wheel used times of *0 kg/m use four times or
more
*0 kg/m or use three times
5, the quality of *1.5 kg
Three, the basic structure and working principle
Working principle: according to no tooth saw cutting principle,
the use of tilting mechanism, rotate the chip of grinding wheel
axis around the rail line along a certain path reciprocating
swing, wafer cutting grinding wheel rail. Wafer wheel turning
plane and rail profile contact length is lesser, thus reducing
wafer grinding wheel wear and improve the sheet wheel utilization
rate and working efficiency.
1 and the Lord movement: the engine the clutch, driving v-belt
drive make main shaft (wafer wheel) rotary.
2, feed movement: using the cutting arm and oscillating arm
relative swing, rely on the dead weight of cut rail machine to
realize wafer grinding wheel feed movement of cutting. Cutting
arm shaft wafer grinding wheel surface of revolution in the swing
arm (card rail agency) center plane flanking, and cantilever is
longer, so saw blade can cut to rail bottom.
Basic structure:
1, oscillating arm shaft, suites for rolling friction, reducing
wear and prolong its service life.
2, oscillating arm, cutting arm, pulley for casting aluminum
alloy structure, light weight, high strength.
3, the clamping mechanism has a derailment prevention function,
cut rail machine in rail, cut rail machine center of gravity and
the rail center axis coincidence, even if unscrew clamping screw,
cut rail machine does not occur tilt.
4, oscillating arm and cutting arm into two body, USES the
assembly way, the operation is simple, the overall for casting
aluminum alloy structure, reduce weight
1 joystick, 2 gasoline engine, 3 oscillating arm, 4 spindle wafer wheel, 5 fixture, 6 cutting arm, 7 connecting shaft, 8 hand starting handle
Pays: | China |
N ° de modèle: | NQG-5III Type |
Prix FOB: | 8400 ~ 9800 / Piece Obtenir le dernier prix |
Localité: | jinzhou |
Prix de commande minimale: | 8400 per Piece |
Commande minimale: | 1 Piece |
Packaging Detail: | negotiable |
Heure de livraison: | negotiable |
Capacité de Fournir: | 4 Piece per Day |
Payment Type: | L/C, D/P, Money Gram, Other |
Groupe de produits : | cutting |