Prix FOB
Obtenir le dernier prix140000 ~ 400000 / Set ( Negotiable )
|1 Set Minimum Order
Pays:
China
N ° de modèle:
YX-NACC 01
Prix FOB:
140000 ~ 400000 / Set ( Negotiable )Obtenir le dernier prix
Localité:
Hubei
Prix de commande minimale:
140000 per Set
Commande minimale:
1 Set
Packaging Detail:
Wooden package , protective package
Heure de livraison:
30days
Capacité de Fournir:
10 Set per Month
Payment Type:
T/T, L/C
Groupe de produits :
Personne àcontacter Mr. John
Anzhankou Road, Dongbao District, Jingmen, Hubei
Yixiang Non-autoclaved Aerated Concrete Blocks Production Line
Program can make a large use of fly ash, slag, stone powder and
other wasted materials to produce new-type wall materials. Raw
materials are easily obtainable in every place, and are wasted
materials. No autoclaving is needed during whole production
process, no emitting waste water, waste gas and waste solid. Low
investment, fast reward, easy operation, and blocks forming period
is short, easy curing, significantly increase investment to build
factory and cost of product, profit margin is large, reduced
contamination the waste materials caused to environment. This
program truly integrates economic benefits, social benefits and
environmental benefits.
1. Raw materials are in wide range, cost is low
Not only fly ash, slag, sand, stone powder, lime, construction
waste, etc can be used with our company's technology and machines
to produce Non-autoclaved aerated concrete blocks, but also
waste-utilization rate can reach *0%, raw materials are in wide
range, no consumption of coal, low consumption of electric power,
high automation level, workforce required is few, production cost
is largely reduced meanwhile quality and strength of product will
not decline.
2. Low investment, quick reward
Traditional autoclaved aerated concrete blocks require investments
of more than 3 million US dollars.However the production technology
and machines are only **0,**0 to **0,**0 US dollars. Establishing
factory is very easy, required land area is small, going into
production after installation is fast, only one month is needed to
go into production after installation, the investments is only
within *0% of autoclaved aerated blocks factory. And that the most
technical parameters of non-autoclaved aerated concrete blocks
transcend the traditional autoclaved aerated concrete blocks, and
reach national technical standard.
3. Low carbon & environmental friendly, energy saving &
reducing emission
No burning and no autoclaving during the whole production process,
no carbon emitting, no pollution, no waste water and waste residue,
true green energy saving & environmental friendly construction
materials.
4. High technology
The manufacturing techniques and special technology researched and
developed by our company, enhanced strength indexes(3.0~4.0Mpa)
meanwhile improved waste utilization rate(*0%), largely decreased
cost, raised threshold that allows competitors enter into this
industry and make competitors unable to and unallowed to imitate,
effectively protected the market space and benefits of our
company's product.
5. Easily start up business
Adopt the method of overall output and support during whole
process, design plan of building factory specifically suitable for
you, guide cons
There are two types of aerated concrete blocks in the market, one
type is Autoclaved Aerated Concrete Blocks, which is featured of
big and long autoclave reactors, the other type is Non-autoclaved
Aerated Concrete Blocks, which needs far less investment than the
Autoclaved Aerated Concrete Blocks.
Non-autoclaved aerated concrete blocks is a kind of lightweight
porous silicate product, its main raw materials are siliceous
materials(sand, fly ash and silicon-containing gangue, etc.) and
calcareous materials(lime, cement), added with aerating
agent(aluminum powder), produced through process of batching,
mixing, pouring, precuring, cutting, curing. The existing
construction heat preservation wall blocks, which contains a small
number of cement and lime, its strength is mainly produced from
hydrate crystal formed by steam heating and curing. While
non-autoclaved aerated concrete blocks, its strength is produced
from natural curing of cement, without need of autoclaving, so it
is called non-autoclaved aerated concrete blocks.
Advantages of Non-autoclaved Aerated Concrete Blocks
1. Light weight and high Strength
2. Heat preservation and insulation
3. Sound insulation, reduce noise pollution
4. Excellent anti-seismic property
5. Adjust indoor temperature
6. No cracks, can hang heavy items
7. High fire retardancy
8. High waterproof
9. Various speculations availabl
Â
Pays: | China |
N ° de modèle: | YX-NACC 01 |
Prix FOB: | 140000 ~ 400000 / Set ( Negotiable ) Obtenir le dernier prix |
Localité: | Hubei |
Prix de commande minimale: | 140000 per Set |
Commande minimale: | 1 Set |
Packaging Detail: | Wooden package , protective package |
Heure de livraison: | 30days |
Capacité de Fournir: | 10 Set per Month |
Payment Type: | T/T, L/C |
Groupe de produits : | CLC blocks machine |