Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
Russia
N ° de modèle:
-
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
Russia
Personne àcontacter Ms. Beldina
2 Melnikov Street , Yekaterinburg,
Universal control cable NIKI
is intended for transmission of
signals and information from sensors to control equipment and
is used for remote control over actuating mechanisms during
connection for installation inside and between
the instruments.
The cable has increased frost resistance and is
suitable, among other things, for laying at the facilities of oil,
gas, petrochemical, chemical industry, power engineering, located
in the Far North regions. Increased noise resistance of the
structure ensures high quality of the signal, while its
impermeability prevents the spread of moisture.
It should be noted that the NIKI control cable
is one of the most popular developments of Cable Alliance Holding.
Its main advantage is versatility: a customer can choose the design
that best meets the goals and objectives of the project. NIKI
control cables can be used under various conditions as power
cables, control cables, for digital signal transmission, etc.
APPLICATION
2KhLÂ design-
 increased frost resistance
-60 °C - minimum installation temperature without
preheating.
In information networks
as:
- installation
cables;
- control
cables;
- communication
cables;
- fire alarm
cables.
U, Rs... Shr
design- increased mechanical and temperature
resistance of the cable.
Cables in sheath of polyurethane or sheath and insulation from
organosilicon ceramic-forming rubber have increased resistance
to mechanical impacts.
In measurement systems for
connection of different sensors and
transducers of:
-
pressure;
- humidity;
- level;
- flow;
- counters;
- thermometers (including
thermometers
connected via three-pin
circuit);
- gas
analyzers;
- corrosion monitoring devices
etc.
Compliance with RS-485,
HARTcompliance with the requirements of industrial
interfaces.
Cables with twisted pair in insulation of cross-linked polyethylene
correspond to the HART and RS-485 standards.
Or signal transmission by
types:
- dry contact;
- natural signal;
- physical signals 4...20 mA, 0...10V;
- digital, transmitted via protocols: RS-232, RS-485, HART,
Profibus-PA, Fieldbus, Modbus.
-2KhL design allows to install
cables without preheating at temperatures not less than -60 °C,
while all other cables of -KhL design this indicator is limited to
-30 °C.
Laying of cables of -2KhL design at low
temperatures does not require long-time heating in
heated
premises or using electric current, therefore these products are
the best solution for laying , installation and
operation during winter.
Cables of -2KhL can be manufactured in different designs by fire
hazard: ng(A), ng(A)-LS, ng(A)-HF,
ng(A)-FRLS, ng(A)-FRHF.
Â
Â
| Pays: | Russia |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | NIKI control cables |
