Prix FOB
Obtenir le dernier prix45 / Piece
|100 Piece Minimum Order
Pays:
China
N ° de modèle:
EP-01A
Prix FOB:
45 / Piece Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
45 per Piece
Commande minimale:
100 Piece
Packaging Detail:
Plastic box
Heure de livraison:
3-7days
Capacité de Fournir:
1000000 Piece per Month
Payment Type:
L/C, T/T, Western Union
Groupe de produits :
China
Personne àcontacter Tina
Huizhou, Guangdong
EP**1A
1.Product parameters:
|
Size: |
**0**5**8mm |
|
Weight: |
**0g |
|
Output: |
5V/2A; **- Mobile phone, Tablet PC, PSP, MP3/MP4. *2V/2A; **- Car refrigerator, blast pump, etc. *9V/3.5A; **- Laptop PC Jump start;**- *2V vehicle LED light **- (light, burst flashing, SOS) |
|
Input: |
*2V/2A |
|
Starting Current: |
**0A |
|
Peak Current: |
**0A |
|
Operating temperature : |
**0°C ~ *0°C |
2.Parts List:
|
# |
Parts Name |
Quantity |
|
1 |
Host |
1 |
|
2 |
Mobile phone switch cable |
1 |
|
3 |
Notebook switch cable |
1 |
|
4 |
Mobile phone connector |
8 |
|
5 |
Notebook connector |
8 |
|
6 |
Home Charger |
1 |
|
7 |
Car charger |
1 |
|
8 |
Jumper cable with clamps |
1 |
3.Instructions for
use:
1, Select
the appropriate voltage and connector for the electronic device
to charge / power supply
2, Press
the switch to start charging when your device connected with
EPOWER; If you unplug the cable, auto-sleep will start in one
minute.
3, Five
lights will flashcircularly
during
the charging by EPOWER and all lights will keep bright when
your device is full-charged
4,
During
the charging for your device, LED lights indicate the balance
power of built-in battery of EPOWER. Four lights indicate *0%
balance, three lights indicate *0% balance, two lights indicate
*0% balance and one light indicates *0% balance. The built-in
battery is empty whenall LED
lights start to flash
5, Press the switch three seconds to start If you want to use LED for illumination and select the status ( light, burst flashing, SOS, close) by pressing the switch to transform.
6,
Store
the product in a cool and dry place and away direct
sunlight.
4.Jump start *2V vehicle Instruction:
1. Make sure that the number of indicators is not less than 3 ones.
2. Connect the RED clamp to the vehicle's battery positive (+) terminal and connect the BALCK clamp to the vehicle's battery negative (-) terminal.
3. Plug the cord of jumper cable into the jump start socket.
4. Start the vehicle.
5. When the vehicle is started, remove the jumper cable from EPOWER and disconnect RED and BALCK clamps to the vehicle battery.
6. Leave the vehicle's engine running.
5.Product
Highlights:
The smallest and
lightestjump
starter with patented
technology in the current market.
Use high power polymer cells,
fast charging and low self-discharge, cycles can reach ***0
times.
Support *2V vehicle for emergency
start, portable illumination and various mobile phone, PSP,
MP3/MP4 Pocket PC PDA, notebook as well as other products
charge / power supply;
6.Product photo
| Pays: | China |
| N ° de modèle: | EP-01A |
| Prix FOB: | 45 / Piece Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 45 per Piece |
| Commande minimale: | 100 Piece |
| Packaging Detail: | Plastic box |
| Heure de livraison: | 3-7days |
| Capacité de Fournir: | 1000000 Piece per Month |
| Payment Type: | L/C, T/T, Western Union |
| Groupe de produits : | Hot sale |
