Prix FOB
Obtenir le dernier prix10 ~ 180.8 USD / Piece
|10 Piece Minimum Order
Pays:
China
N ° de modèle:
MoSi2--2
Prix FOB:
10 ~ 180.8 USD / Piece Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
10 per Piece
Commande minimale:
10 Piece
Packaging Detail:
in wooden box with foam board
Heure de livraison:
7~25 days after receiving the payment
Capacité de Fournir:
12000 Piece per Month
Payment Type:
T/T, Western Union, Money Gram
Groupe de produits :
-
Personne àcontacter Ms. Alisa
2ND XINXING 8, Zhengzhou, Henan
1.MoSi2 heating element is a kind
of resistance heating element basically made of high pure
Molybdenum Disilicide.
2.MoSi2 heating
element
1) Main type :U, W ,UL, WL,
Rod . Material grade
:M***0,M***0,M***0.
2) Standard dimension
(mm):3/6,4/9,6/*2,7/*4,9/*8,*2/*4.
3.It can be widely used in such
applications as sintering and heating treating of ceramic ,magnet
,glass,metallurgy ,refractory,ect.
 4.physical property
| volume density | 5.5~5.6g/cm³ | bend strength |  5.5~*5kg/cm² |
| vickers-hardness | (hv)**0kg/mm² | porosity rate | 7.4% |
| water absortion | 1.2% | hot extensiblity | 4% |
5.The Max temperature of elements in different atmospheres
| Atmosphere |
      Max  |
 element  temperature |
| Â | XYX super MS *7 | XYX super MS *8 |
| Air | ***0°c | ***0°c |
| Nitrogen | ***0°c | ***0°c |
| Argon Helium | ***0°c | ***0°c |
| Hydrogen | ***0~***0°c | ***0~***0°c |
| N2/H2 *5/5% | ***0~***0°c | ***0~***0°c |
 6.Recommend surface load:
| Furnace Temp(°c) | ***0 | ***0 | ***0 | ***0 | ***0 |
| Surface looad of hot zone(W/cm²) | <*8 | <*5 | <*2 | <*0 | <8 |
 7. Installation of
elements
1)vertically hanging
Under normal temperature,MoSi2,element is very
brittleness,while under
high temperature it is plasticity.So,the better way for installation if the
UShape element is to hang
it vertically,to the
furnace top through the support clamping chuck
H.The aim of such way is
to avoid putting the mechanical stress directly to the element
heat-generating end ,or the element will easily be
broken.
2) support clamp
Support clamp are applied to 9/*8 and 6/*2
two kinds of elements respectively. the support clamp supports
the whole weight of the element and the position of the element
is also determined by it
.therefore ,it must be installed carefully to assure that the
element it veryically
hung.in order to prevent
the element from being over heated locally,the taper part of the element lower end
must put into the furnace chamber.
| Pays: | China |
| N ° de modèle: | MoSi2--2 |
| Prix FOB: | 10 ~ 180.8 / Piece Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | 10 per Piece |
| Commande minimale: | 10 Piece |
| Packaging Detail: | in wooden box with foam board |
| Heure de livraison: | 7~25 days after receiving the payment |
| Capacité de Fournir: | 12000 Piece per Month |
| Payment Type: | T/T, Western Union, Money Gram |
| Groupe de produits : | - |
