La description

Technical Specification

1. Act as a PROFIBUS DP slave at the side of PROFIBUS DP, while Modbus master, Modbus slave can be selected at the side of Modbus.  The PROFIBUS DP and Modbus exchange data via two buffer(Input buffer and Output buffer);
2. Complete PROFIBUS DP V0 slave functionality according to EN****0(IEC****8);
3. Automatic baudrate detection (***0 bit/s ~ *2 Mbit/s);
4. PROFIBUS /output byte number can be set through Step7 easily, the maximum number: Max Input Bytes ≤**4 Bytes
   Max Output Bytes ≤**4 Bytes
   Max Data Bytes ≤**8 Bytes
5. As a Modbus master , supports *1H、*2H、*3H、*4H、*5H、*6H、0FH、*0H function codes, It can be configured up to *8 Modbus commands;
6. As a Modbus slave, supports Modbus register address 3 area(3xxxx), 4 area(4xxxx), 0 area(0xxxx) and 1 area(1xxxx); 3 area supports o4H function code, 4 area supports *3H、*6H、*0H function codes, 0 area supports *1H、*5H、0FH function codes, 1 area supports *2H function code;
7. Modbus interface is RS**5, half-duplex. Baud rate: **0, **0, ***0, ***0, ***0, ****0, ****0, ****0, *****0bps. 8 bits, Parity check mode: None, Odd Even, Mark and space. Stop bit: 1, 2;
8. Optically isolated PROFIBUS interface and Modbus interface;
9. Power supply: *4VDC (9V**0V),*0mA (*4VDC);
10. Operating temperature: **0℃ ~ *0℃;
11. Humidity: 5 to *5%(No Condensing);
12. Mechanical Dimension: *8mm(W)***0mm(H)***5mm(D);
13. Installation: *5mm DIN RAIL;
14. Protection Level: IP*0.