Medium frequency induction heating forging furnace machine/induction heater/induction heating systems

Prix FOB

Obtenir le dernier prix

4200 ~ 4600 USD / Set ( Negotiable )

1 Set Minimum Order

Pays:

China

N Â° de modÃ¨le:

MF-35

Prix FOB:

4200 ~ 4600 USD / Set ( Negotiable )(Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

4200 per Set

Commande minimale:

1 Set

Packaging Detail:

fumigation-free plywood case

Heure de livraison:

within 7-10 days after getting payment

Capacité de Fournir:

200 Set per Month

Payment Type:

PayPal, Western Union, T/T

Groupe de produits :

induction forging furnace

Contacter maintenant

Yongkang Yuelon Electronic Equipment Co., LTD.

China

Membre gratuit

Personne Ã contacter Ms. Tina

No.76 Chengtang village, Yongkang city, Zhejiang province, China, Jinhua, Zhejiang

Contacter maintenant

SpÃ©cification du produit

Frequency:1-20KHZ
Power:35KW
Voltage:3 phase 380 V 50 or 60 HZ
Duty cycle:100%
Current:51A
Heating time:0.1-99.9 seconds

La description

Medium frequency machines are usually used in the penetration heating occasions. For example:

Rrod heating for forging rod end heating

Melting of almost all kinds of metals

Heating of stators or rotors for fitting

Heating of tube end for extrusion

Heating of moulds deep quenching of shafts and gears tempering or preheating of weld joint and so on

MF induction forging furnace applied to the rod with diameter from Φ*5 to *0mm or quadrates or other shape stuff: steel, stainless steel, copper,
brass, aluminum round bar, square and other shape materials. Can be used for heating the whole, can also be used for local heating,
such as heating the end portion, an intermediate portion of the heating, etc.

The basic composition of MF induction forging furnace

1. Medium Frequency power (heating generator)

2. Compensation capacitor

3. Induction coils and rails, protective cover

4. Feeding mechanism

5. Working table

Depending on the application requirements, but also including

1. The infrared thermometer

2. Temperature control device

3. Water cooling system

4. Others

Main models and heating ability:

Model	Maximum power	Recommended Applications	Heating capacity of commonly used materials
Model	Maximum power	Recommended Applications	Heating steel, stainless steel material to ***0 â„ƒ	Brass material is heated to **0 â„ƒ
MF**5 Forging furnace	*5KW	for about Φ****0 bar heating	1.*5KG/min	1.*5KG/min
MF**5 Forging furnace	*5KW	for about Φ****0 bar heating	1.*7KG/min	2.*3KG/min
MF**0 Forging furnace	*0KW	for Φ****0 bar heating	2.5KG/min	3.5KG/min
MF**0 Forging furnace	*0KW	for Φ****0 bar heating	3.*3KG/min	4.*7KG/min
MF***0 Forging furnace	**0KW	for Φ****0 bar heating	4.*7KG/min	5.*3KG/min
MF***0 Forging furnace	**0KW	for Φ*0 bar heating above	5.*3KG/min	********-
MF***0 Forging furnace	**0KW	for Φ****0 bar heating	9.2KG/min	********-
MF***0 Forging furnace	**0KW	for Φ****0 bar heating	1.5KG/min	*********-

MF induction forging furnace features:

1.Frequency range from 1KHZ**0KHZ, can be designed appropriate frequency according to the diameter of the specific heat of the workpiece.
Design the induction coil and a capacitor to be different frequencies, different materials to adapt to heat. E.g: heating the thin rods (small material),
the higher frequency heating, to achieve high heating efficiency; heating the thick rods (big material), the lower frequency need, ensuring the heating penetrating.

2.Induction coil length rang from **0mm to 1 meter, the quantity of heating material can be up to ***0 pieces at the same time to make sure the penetrating effect.
Different coils can be easily changed depends on the different rods.

3. In the continuous heating process, the load inside the coil is stable, to overcome the great heating power change caused by the great change of the load during the
heating course from cool to ***0â„ƒ,the actual power can reach more than *5% of the rated power of the machine.

4.Pneumatic rod feeding system is applied, the heating power and the feeding speed are adjusted to send the rod out continuously step by step.
It is very convenient to operation.

5.Compared with SCR MF furnace, the MF induction forging furnace has small size, easy maintenance, and energy saving about ****0%.

FAQ:

1. Which countries your products are exported to?

Our products are sold all over the world.

2. How about the warranty?

All our products have one year quality warranty, and we provide life long time technical support and other assistance.

3. How to install your machine?

We have paper installation instructions and videos, we will teach till you learn it.

4. Which export port you use?

Any China port, commonly we will use Ningbo, Shanghai port, it can appoint as you like.

5. How about the payment terms and delivery time?

Payment terms for small machines: **0% T/T/ Western Union/Paypal/Cash in advance.

The big machines and big amount: *0% deposit, *0% before shipment (we will shoot total delivering process for customer's confirmation)and the related papers.
You can pay by T/T, L/C.Usually, the small machine delivery time is within 7 days, the bigger one takes about *5days receiving the payment,
we will delivery goods on time.

6. Is your goods has CE certificate?

Yes, all our goods has CE certificate. All machines are high quality goods.

7. What is your nature of your company: Dealer or factory?

We are manufacturer and have a big factory, warmly welcome to visit our factory and contact us.

Call or e-mail us now, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for you.

Pays:	China
N Â° de modÃ¨le:	MF-35
Prix FOB:	4200 ~ 4600 / Set ( Negotiable ) (Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	4200 per Set
Commande minimale:	1 Set
Packaging Detail:	fumigation-free plywood case
Heure de livraison:	within 7-10 days after getting payment
Capacité de Fournir:	200 Set per Month
Payment Type:	PayPal, Western Union, T/T
Groupe de produits :	induction forging furnace