Prix FOB
Obtenir le dernier prix3.9 ~ 5.2 / Kilogram ( Negotiable )
|200 Kilogram Minimum Order
Pays:
China
N ° de modèle:
HY528#, 540#, 570#
Prix FOB:
3.9 ~ 5.2 / Kilogram ( Negotiable )Obtenir le dernier prix
Localité:
Guangdong China
Prix de commande minimale:
3.9 per Kilogram
Commande minimale:
200 Kilogram
Packaging Detail:
25kg/drum and 200kg/drum
Heure de livraison:
within 3 days after payment confirmed in our bank.
Capacité de Fournir:
5 Ton per Day
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter jessica
Long Gang District, Shenzhen, Guangdong
Manual mold silicone rubber
applications
Â
Manual mold silicone
rubber is mainly
applicable to manual mold design, PVC plastic molds, cement
product molds, melting point alloy molds, alloy toy craftworks,
plastic toy craftworks, gifts and stationery, large statues,
duplication of cultural relics, shoe sole mold fabrication, pad
printing positioning, shock resistance for electronic
equipments, etc.
Manual mold silicone
rubber features description
Â
1 Good elasticity Â
2Â Non-deformation
3 Heat resistanceÂ
4Â
Low shrinkage
Â
HY***8# is applicable to make molds of smaller products and the production will be **3 pieces.
HY***0# compared to other two types, for its moderate hardness and better quality & performance, its production will be ****0 pieces.
HY***0# is applicable to large size products duplications and Electronic equipment antivibration.
Â
Firstly process and prepare the model mold or the
product to be duplicated, take certain amount of the silicon
rubber, add **3% solid curing agent, and mix evenly and they
are ready for use. One pair of mold can be solidified and
formed in **3 hours.
 (Note: our company does not recommend you to add silicon oil. If a special soft silicon mold or fine detailed and complex patterns products are required, 5%**0% silicon oil can be added to soften the mold for easy demolding.)
 To handle this
situation depends on different cases. Under the condition of an
available vacuum pumping machine, mix the silicon rubber and
curing agent evenly and then take it to vacuum chamber to
deair. If without a vacuum pumping machine, reduce the amount
of the curing agent properly. For example, change the mixing
ratio of the silicon rubber and the curing agent from former 4%
to 1%*2%. In this way, the pre-crosslinking time of silicon
rubber will slow down, so the air in the mold will be
eliminated gradually to reduce the air
bubbles.
Â
 The reasons why the
phenomenon arises are as follows:
(1) incorrect mixing
proportion of the silicone rubber  and the curing
agent due to unqualified
weighing.
(2)uneven mixing of the silicone rubber  and the curing
agent, which may cause material wasting , and we
should avoid it .
Â
3.What should we do when the silicone rubber stick with the mold? It arises because we didn\\\\\\\'t handle the model mold (product mold) properly. Before mold making, the model mold has to be sanded and polished, and cleaned carefully concerning the master mold with a coarse surface or to make complex molds. and then brushing a layer of release agent evenly. General release agents include Vaseline, detergent, liquid paraffin, etc. The release agents can be selected according to the different textures of various model molds.Â
Â
4.What should we do if a silicone rubber mold product deforms?Â
For more information
about munual mold silicone
rubber,please feel free to contact
withMs
Jessica.
Mobile:*************7
TEL:Â ***************4
FAX:Â ***************0
E-mail:hysb(at)szrl(dot)net
Â
Â
Pays: | China |
N ° de modèle: | HY528#, 540#, 570# |
Prix FOB: | 3.9 ~ 5.2 / Kilogram ( Negotiable ) Obtenir le dernier prix |
Localité: | Guangdong China |
Prix de commande minimale: | 3.9 per Kilogram |
Commande minimale: | 200 Kilogram |
Packaging Detail: | 25kg/drum and 200kg/drum |
Heure de livraison: | within 3 days after payment confirmed in our bank. |
Capacité de Fournir: | 5 Ton per Day |
Payment Type: | L/C, T/T |
Groupe de produits : | RTV silicone rubber |