Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
Turkey
N ° de modèle:
MAKS 1440
Prix FOB:
Localité:
TURKEY
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
T/T
Groupe de produits :
-
Personne àcontacter Esra
Begonya, Anadoluhisari, Other
 PRODUCT BENEFITS
- Prevents scale formation and resulting tube failures.
- Reduces deposits, resulting in more efficient heat transfer,
energy savings and fewer acid cleanings.
- Removes & cleans hardness deposits on boiler surfaces, thus
reduces corrosion and increases heat transfer efficiency
- Supports internal metal passivation in feedwater and boiler
system.
- Multifunctional properties, acts also as fast oxygen
scavenger.
- Contains only FDA approved ingredients.
PRINCIPAL USES
MAKS ***0 is designed to assure a high level of cleanliness in the
boiler system, especially on the heat transfer surfaces, together
with a complete corrosion inhibiting action. The product supports
internal metal passivation. MAKS ***0 can be applied in low
pressure boiler systems without deaerator and on softened feedwater
make-up with a total feedwater hardness of up to *5 ppm. By
providing clean heat transfer surfaces MAKS ***0 saves energy and
reduces cleaning and maintenance costs. MAKS ***0 is not volatile
and is in compliance with FDA and USDA regulations. Suggested
maximum use pressure for MAKS ***0 is *0 bar.
GENERAL DESCRIPTION
MAKS ***0 is a specially formulated blend of synthetic organic
polymers, sulfite and phosphates.
DOSAGE
MAKS ***0 dosage will vary as a function of feedwater quality and
pressure.
Your BIMAKS representative will recommend the optimum dosage
necessary to ensure maximum program performance according to your
specific system parameters.
To control the performance of MAKS ***0 treatment, a suitable
analytical procedure as well as a simple test-kit is available.
FEEDING
MAKS ***0 is preferably applied neat via a stainless steel quill
into the deaerator or the feedwater line. However, where dilution
is required, softened water, condensate (<*5°C) or deaerated
boiler feedwater should be used. MAKS ***0 must be fed
continuously; any interruption in feed will result in scale or
deposit formation and possible tube failure. If feedwater is used
for steam attemperation, MAKS ***0 must be fed downstream of the
attemperation water takeoff. MAKS ***0 must not be combined with
alkaline products.
MATERIALS: Storage and application equipment (pumps, lines) should
be made of Stainless Steel **4 & **6, PE, PVC or PTFE. Do not
use aluminium, copper, brass, polyester or zinc in contact with the
neat product.
HANDLING – STORAGE - SHIPPING
As a standard precaution with all chemicals we recommend the use of
protective equipment such as goggles and rubber gloves when
handling. Consult the Material Safety Data Sheet as the only
official source of Environmental and Safety information.
The product can be stored for at least *2 months from date of
shipping if kept in its original, unopened container and under
normal warehouse conditions. Protect from freezing and from
exposure to high temperature.
MAKS ***0 is available in non-returnable *5 kg pails and containers
of different sizes.
| Pays: | Turkey |
| N ° de modèle: | MAKS 1440 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | TURKEY |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | T/T |
| Groupe de produits : | - |
