Light Hydrocarbons (C3-C5) Aromatization Catalyst By Dezhou Chemiehandel,

Light Hydrocarbons (C3-C5) Aromatization Catalyst

Pays:

China

N Â° de modÃ¨le:

Prix FOB:

(Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

Commande minimale:

Packaging Detail:

Heure de livraison:

Capacité de Fournir:

Payment Type:

Groupe de produits :

SpÃ©cification du produit

La description

Product Introduction

The light hydrocarbons (C*-C5) aromatization catalyst produced by our company adopts the high silicon zeolite with certain pore structure. Under a certain temperature, the catalyst can convert light hydrocarbons (C*-C5) to benzene, toluene, xylene and other aromatic components, while generating dry gas containing hydrogen, methane, ethylene, ethane and other components. The catalyst has a good aromatic selectivity and the coke regeneration rate is low. Meanwhile, it has good activity and stability. It has a long service life and can be regenerated.

Properties of Catalyst

Appearance		gray
Particle size	sphere	Φ**5mm
	strip	Φ2.0****0mm
Bulk density		≥0.**0.0g/cm3
Strength		≥**0N/cm
Pore volume		≥0.*5ml/g(BET)
Surface area		≥**0m2/g(BET)

Technological Parameter

Reaction temperature:******0â„ƒ

Reaction pressure: 0.**0.4Mpa

Weight hourly space velocity: 0.**0.3h*1

Service life: more than 2 years

Technological Process

1. Reaction system

Using a fixed bed reaction methodï¼Œit can operate continuously or intermittently. The reactive part contains a raw material preheating furnace and a fixed-bed reactor. The regeneration system is equipped with a regeneration gas heating furnace. During the continuous operation, each reaction runs in one reactor. The reaction in the reactor and

the catalyst regeneration conduct alternately, so that the whole operation stays in a continuous state

2. Separation of the products

The reaction products are made up of rich gas and liquid products. The rich gas enters into the absorption and stabilization system. After aromatization reaction, the aromatics content of liquid products is more than *0%, as the raw material is mixed light hydrocarbons.

3. Regeneration system

After the nitrogen and purified air (for supplement) from the system entering separately into the regeneration gas sub-tank in proportion for liquid separation, they enter into regeneration gas heat exchanger. After exchanging with circulating gas, they enter into regeneration gas furnace for heating up to the required temperature. At last, they go into the aromatization reactor, scorching from the top to the bottom from the top of the bed. The air should be supplied at any time according to the temperature variation of the reactor bed.

Pays:	China
N Â° de modÃ¨le:	-
Prix FOB:	(Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	-
Commande minimale:	-
Packaging Detail:	-
Heure de livraison:	-
Capacité de Fournir:	-
Payment Type:	-
Groupe de produits :	-