La description
Product
Introduction:
Model
Number:BLJCW**-WB-E**-AC*6
LED Lamp
Bead:**8PCS/SMD*****8
Contour
Dimension: outer
diameter *4mm, Height:**5mm
Lamp
Cup: BT inflaming
retarding ,high temperature resistance,anti-aging
Lamp
Socket:
E*7standard
Viewing
Angle:
**0°
Power
Consumption:
*2W
Input
Voltage: AC*6v/*0HZ***0HZ
Color
Temperature:***0K(warm
light)
Luminous
Intensity:**0
lumens
Efficiency:
greater than *0%
Performance
Factor: greater than
0.*5
Protection
Grade:IP*0
Continuous
Working:****0
hours(*5 degree),****0 hours(0～ï¼*0
degree)
Attenuation
Ratio:1% ***0
hours(*5 degree)
Working
Life: greater than
****0 hours
The series of the JM machine tool LED lights is
designed for the small and
medium
size machine tool, numerical control machine, milling and drilling
machine, modular machine tool and other equipments lighting by our
company .Our LED lights is application to Alternating Current*2v/
*4v/*6v/**0v.
The light cover adopts the
fireproofing material, and the advantage is waterproof,
anti-explosion and weatherproof. The integral structure of the
light body is heat emission ,not only the surface look nice but
also the light working temperature is down to the best
point.Because of the high quality and the advanced circuit design
the light has excellent isolation, inflaming retarding, impact
resistance and strong corrosion prevention advantages, and
guarantee the light can work uninterruptedly in the machine tool
working enviroment.The LED machine tool light can widely use
in the machine tool working table and the workshop with the light
distribute uniformity ,the lighting effect is favorable and
long working life.
According to the low voltage,
moist, safety and anti-explosion special enviroment, our company
design and produce the series of LED machine tool lamps by
ourselves.
According to the power
supply voltage, it can divide intoAC*2V/AC*4V
/AC*6V/ AC**0V.
According to the
connector, it can divide into E*7 screw joint corn-type machine
tool LED lamp, E*7 screw joint horizontal plug machine tool lamp,
E*7 screw joint flying disk type machine tool LED light, tube
–type machine tool LED lamp.
Every series of the lamp has warm
light (***0k) and white light(***0k).
Advantages of the machine tool
LED lamps:
1.The outer cover is made of low shrinkage not saturated
polyester glass fiber reinforced plastic, with the nice
appearance, light weight, open and close flexibly, use safety
simpler reliably, insulation, antiflaming, impact resistance and
antiseptic advantages.
2.The light transmitting cover
adopt the cold resistant PC material ,on the basic of the
original cover we introduce the newest and microthermal
plasticizer and inhibitor, avoided easy breakage problem, with
impact resistance and high light transmittance advantages.
3.Long working life: The lamp body
adopt the heat dissipation over-all structure, so the working
temperature is down to the best point .The working life is ****0
hours , and it can non-stop work more than ****0 hours.
4. High efficient and
energy-saving: Compare with the fluorescent lamp and common
energy –saving lamp, it can save electricity *0—*0% and
******0%.
5. Instant-on: response time is
**0ns,open and close frequently does not impact the working
life,*0 degree below also can instant start.
6. Non-pollution: all the material
adopts the non-pollution, non-mercury and non-lead.
7. Anti-explosion: The over-all
structure adopt the safe design and against
breakage.
8. Standard lamp socket: E*7 lamp
sockets, easy replacement, replace the fluorescent lamp and
common energy –saving lamp directly.
9. Adopt the Nichia LED SMD bead,
high lighting effect, low brightness decay.
Application
area:
Widely used for the small and
medium size numerical control machine tool, modular machine tool, machining center and general-purpose machine
tool,it is suitable for the indoor lighting of the enclosed
numerical control machine tool ,and the operating lighting of the
armarium, vehicle
repair,ship repair,equipment maintenance.
| Pays: |
China |
| N ° de modèle: |
BLJCW12-WB-E27-AC36
|
| Prix FOB: |
1 ~ 200 / Piece ( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
china |
| Prix de commande minimale: |
1 per Piece |
| Commande minimale: |
200 Piece |
| Packaging Detail: |
strong cartonbox with PE foam |
| Heure de livraison: |
3days to 15days |
| Capacité de Fournir: |
500000 Piece per Month |
| Payment Type: |
T/T, L/C, D/A, D/P, Western Union, Money Gram, PayPal |
| Groupe de produits : |
- |
