La description
DescriptionParameter
Specifications for displayer
VoltageAC*****5V(designated)
Frequency*0Hz~*0Hz
Alarm volume0dB**0dB
Response time0.1S
Output contactNormally closed contact
Wattage Output contact load(resistance) mainframe— *2A **5VAC
7A **0VAC
7A *0VDC
WeightAE**1A: 0.8Kg;
AE**1B: 0.3Kg;
AE**1C: 0.8Kg;
Ambient temperature**0C ~ **0C
IP protectionAE**1A: IP*5; AE**1C: Indoor
Humidity*0% ~ *5% (no condensing)
InstallationBolt fixed
Specifications for the sensor
Detection distance**0mm*0m
Spot diameterΦ =**0mm(*0m)
VoltageDC****0V
Switched outputPNP
Input current Imax**0mA
Current load≤ **0mA
Trigging time*0/s
IP protectionIP*5
VDE protectionII level
Ambient temperature**5C ~ **5C
Guard circuit*A, B, D
*A=Uv joint against anti-joint
B=output end anti-overcurrent and short-circuitproof
D= output end anti-overcurrent and short-circuitproof
Manjor functions and features
Adopt impoted laser sensor.
Detection distance: **0mm...*0m.
Each sensor on the left and rigth for checking two directions.
Two-way normally closed node output each side.
Voice alarm, continuous and three-times voice mode can be switched,
adjustable volume.
High integration design, flexible installation, reliable
quality.
Self-check function, pause function.
System block diagrams
Optical system:
1. A displayer, A sensor, A reflector, this system is single
controlled;
2. A display, 2 Sensors, 2 reflectors, This system is double
controlled;
AE**1C Adjustment:
1, Press shelf-check , red alarm light are burning, relay has
the output(pic. 4)
2, AE**1A transmit the signal to the displyer, the homologous red
alarm light burns. Press the"pause" , the voice stops.
3, Press"Volume +" or"Volume " to adjust the volume.
4, Press"Mode", voice mode can be switched between "
Continuous" and "Three times".
AE**1A adjustment: AE**1A set-up panel as pic. 5, the set-up steps
as follow:
1, Offer DC ****0V to AE**1A. Point AE**1A correctly to the
reflector.
2, Rotate"Align"to Q1, Press"Teach", Indicator light Flashes. When
the light are steady burning, the distance S1 is setted
successfully.
3, Set S2(Q2) per the same above procedure.
4, Rotate"Align"to"Run", all settings are done.
5, When the distance between AE**1A and reflector is not larger
than S1, Q1 outputs. When the distance between.
AE**1A and reflector is not larger than S2, Q2 outputs.
Notice:
AE**1C only can be fixed indoor.
Check the voltage of power and AE**1C whether they are
corresponding.
Connect the cables according to the wiring diagram, Do not make the
short circuit.
The temperature rise is normal when use the controller.
Keep the lentiform of reflector and sensor clear. Pollution will
affect the reliablility. What's worse, the product will be scrap.
Please clear the products every 6 months periodically.
Please read the instruction carefully. Do not open the case
privately
| Pays: |
China |
| N ° de modèle: |
RC/AE411
|
| Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
- |
| Commande minimale: |
1 Set |
| Packaging Detail: |
cartons |
| Heure de livraison: |
15days after TT |
| Capacité de Fournir: |
10 Set per Day |
| Payment Type: |
T/T |
| Groupe de produits : |
tower crane anti-collision
|
