Prix FOB
Obtenir le dernier prix( Negotiable )
|25 Minimum Order
Pays:
China
N ° de modèle:
KY9983D SMT Adhesives
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
-
Commande minimale:
25
Packaging Detail:
20ml/30ml/300ml
Heure de livraison:
15 days
Capacité de Fournir:
-
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Ms. crystal
No.31 Jiangling Road, Zhongshan, Guangdong
KY***3D SMT adhesive is a kind of single epoxy resin adhesive.It
is specially fit for SMT technology of sticking clips components
stably in PCB board Long-term preservation stability is
expected.Moreover it is good for environment protection for its
safety,no solvent and no smelling.
Features:
1.Very good stable curing shapes without stringing and slumping are
achieved at super high speed dispensing and very small dots.
2.It could be curing in lower temperature than any other glue
3.Long-term preservation stability is expected.
4.High heat-resistivity and excellent electric properties are
possessed.
Curing Condition
1.The curing condition recommended is in 3.5 min after the PCB's
surface temperature has reach **0°CÂ
2.The longer
the curing time is,the stronger adhesive strength can be
obtained.
3.The components mounted on the PCB have different
material,size,etc,which also makes the actual temperature attached
to the adhesive different.So please identify the most suitable
curing conditions based on the actual production situation.
Specification
| Item | Data |
| Printing method | Super high speed dispensing |
| Composition | Epoxy resin |
| Color | Red |
| Specific gravity | 1.3 |
| Viscosity(*5 ℃5rpm) | **0PaS(**0,**0cps)~**0PaS(**0,**0cps) |
| Thixotropy Index | 6.8(1rpm/*0rpm) |
| Adhesive Strength | Capacitance ***5C,4.5~6kg,Vitreous Diode3.5~4.5kg |
| Dielectric constant | 3.*2/1MHz |
How to use
1.Adhesive should be preserved in refrigerator
(Below2~*0°C)
to keep on its quality.
2.Make sure the cover of the container is tight.
3.Before processing,the adhesive should be taken out from the
refrigerator for de-freezing about 4hours until it reaching the
room temperature.
4.The bottom of printing screen should be cleaned timely for using
methylbenzene or acetic ether.
5.Qualityi guarantee period is six months.
Packing
*0ml/*0ml/**0ml
Â
| Pays: | China |
| N ° de modèle: | KY9983D SMT Adhesives |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | China |
| Prix de commande minimale: | - |
| Commande minimale: | 25 |
| Packaging Detail: | 20ml/30ml/300ml |
| Heure de livraison: | 15 days |
| Capacité de Fournir: | - |
| Payment Type: | T/T |
| Groupe de produits : | SMT Adhesives |
