La description
Kalia Ä°pek Mat
Water Based Interior Wall Paint
Product Definition
Acrylic emulsion based, photocatalytic (activated by light),
mildew and algae resistant, silicone enhanced, easy to clean,
perfectly scrub resistant, silky matt interior wall
paint.
Application Areas
> On interiors suitably prepared new mineral surfaces such as
concrete, mortar, cement panel, gypsum panel etc. and on old
painted surfaces, putty, glass textile and on wallpaper.
Features
> Photocatalytic; by the activation of light it decomposes the
harmful materials such as nicotine fume and bad odours transferred
by air movements on interior surfaces. Therefore, cleans the air in
the room and enables walls to remain clean for a long time.
> Silicone enhanced. Cleanable with its perfect scrub resistance
therefore stain free.
> Provides relief for those suffering from asthma in particular
by resisting against algae and mildew growth.
> Easily re-touchable, does not leave brush or roller marks.
> High water vapour permeability, allowing the building to
breathe.
> Superior hiding power.
> Solvent free and practically odourless.
> Water thinnable and ecologically compatible.
Technical Features
(at *3°C and *0% RH)
General Data:
Colors: Thousands of colors possible from a mixture of white and A,
B, C bases using the Renk Bankası and the Renk Ustası.
Composition: Acrylic emulsion based
Thinner: Water
Density Approx.: 1.*5 gr/cm³
Application Data:
Application Temperature Range: (*5°C) - (**5°C)
Drying Time: Recoatable after 6 hours and thoroughly dry after *4
hours.
Lower temperatures and/or higher relative humidity will lengthen
the drying process.
Consumption: Depending on the evenness and the porosity of the
surface approximately 0.**0 lt/m² per coat.
Application Tools: Brush, Roller, Airless spraying equipment
Performance Data:
Water Vapour Permeability SD (m) (TS EN ISO ***3 - 2): Approx.
0.**0
Scrub Resistance (cycle) (ASTM ***6): > **0
Gloss (*0°) (ISO ***3): Approx. 7
Service Temperature: (**0°C) - (**0°C)
TS EN ****0: Classification
Wet Scrub Resistance: Class 1
Contrast Ratio: Class 1 (5.5 m2/lt)
Largest Grain Size: Class S1
Gloss: Class G2
Fungi and Algae Resistance: Class K1
Application Instructions
> The substrate must be cleaned from dust, dirt, oil and old
blistered coatings that may prevent good adhesion. The surface
should be made sound, clean and dry. New cementitous substrates
must be cured at least *8 days before application.
> Before application on old painted mouldy surfaces; clean the
surface with a wet cloth and treat with **3 successive wet-on- wet
coats of Kale KF TEMÄ°ZLEYÄ°CÄ° in order to kill the mould on the
wall.
> Sand glossy and/or solvent based painted surfaces to improve
adhesion and remove the occurring powder.
> If necessary, fill the surface cracks and even the substrate
with Kale Ä°NCE AKRÄ°LÄ°K MACUN or Kale Macunart.
> To have a fine, silky texture, smoothen the entire surface by
using Kale Ä°NCE AKRÄ°LÄ°K MACUN or Kale MACUNART.
> Prime the solvent based painted surfaces or water based
painted surfaces on which color change is desired and old painted
water based and very dirty surfaces with Kale SÄ°LASTAR and new and
porous surfaces with Kale SATEN ALÇI ASTARI or Kale SÄ°LASTAR.
> After thoroughly mixing, thin KALÄ°A Ä°PEK MAT with clean
water up to a maximum of *0% by volume and apply in two coats by
using a brush, roller or spray system.
> Wait for a minimum of 6 hours before applying the final
coat
> Clean the tools with water.
> Ensure that the air and surface temperatures are above 5°C
during the application and *4 hours following the application.
Warnings
> S2 Keep out of the reach of children.
> S*4/*5 Avoid contact with skin and eyes.
> S*6 If swallowed, seek medical advice.
Storage
> Store between 5°C**5°C in its unopened pail.
Packaging
> *5 lt pails.
Quality Documents
TS ***8
| Pays: |
Turkey |
| N ° de modèle: |
-
|
| Prix FOB: |
50 / Kilogram (Negotiable)
Obtenir le dernier prix
|
| Localité: |
Turkey |
| Prix de commande minimale: |
50 per Kilogram |
| Commande minimale: |
250 Kilogram |
| Packaging Detail: |
- |
| Heure de livraison: |
20 to 25 days |
| Capacité de Fournir: |
- |
| Payment Type: |
T/T, L/C, D/A, D/P, Western Union, Money Gram |
| Groupe de produits : |
Decorative Coating/Paint
|
