Prix FOB
Obtenir le dernier prix1000 ~ 20000 / Set
|1 Set Minimum Order
Pays:
China
N ° de modèle:
Z14
Prix FOB:
1000 ~ 20000 / Set Obtenir le dernier prix
Localité:
China
Prix de commande minimale:
1000 per Set
Commande minimale:
1 Set
Packaging Detail:
wooden box, steel structure or as customer's requirement
Heure de livraison:
-
Capacité de Fournir:
100 Set per Month
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Cassie
Jinan, Shandong
molding machine introduction:
Â
Microseismic Jolt Squeeze molding machine is suitable for mass production of small castings.The machine adopts microseismic squeeze mechanism, the squeeze force and compression strength design is relatively large, so it can meet the requirements of simple or complex type without presqueeze.
Advantages:
Improve sand compactness, reduce waste, reduce labor intensity,
improve work efficiency, etc.
The air system is simple, easy to operate, flexible, easy to use,
repair and maintenance.
Â
Composition:
The machine is composed of the machine body, mould drawing mechanism, vibration and compaction mechanism, tumbler head part and pneumatic pipeline system, etc.
Â
Feature:
Microseismic compacting moulding machine can make moulding board,
sand box and moulding sand vibrate at high frequency and small
amplitude while moulding sand is compacted.
When the sand box is filled with loose molding sand, there are
still many gaps between the sand grains. At this time, the formwork
is directly vibrated to transfer energy to the sand grains, so that
they can find a new balance position in constant movement, thus
filling the gaps and improving their compactness.
When additional vibration is added during the compaction process,
in addition to the above action, the external friction resistance
between sand grains and the inner wall of the sand box can be
reduced, further increasing the compaction effect.
Therefore, additional vibration can significantly improve the
phenomenon of real-time compaction.
Because microseismic can improve the fluidity of molding sand in
the process of compacting, higher average compactness and more
uniform compactness distribution can be obtained with the same
compactness ratio.
Microseismic compaction molding machine can not only be in the
compaction at the same time microseismic, and in the process of
sand can also be microseismic, that is, the so-called
pre-compaction.
This can increase the amount of sand filling in the sand box and
improve the uniformity of the original compactness and compactness
of the sand mold.
It can reduce the height of the prefill and the travel of the
compacting piston, especially for the high sand box or complex
model.
Â
technical parameter:
type | foundry flask max dimension(mm) | worktable dimension(mm) | compressive stress(kgf) | jolting load(kgf) | compress process(mm) | molding process(mm) | diatance compacting plate with worktable(mm) | free air consumption(m^3/box) | productivity(box/h) | outline dimentions(mm) |
Z**3W | **0x**0x**0 | **0x**0 | ***0 | **0 | **0 | **0 | ******0 | 0.*5 | ****0 | **0x**0x***0 |
Z**4W | **0x**0x**0 | **0x**5 | ***0 | **0 | **0 | **0 | ******0 | 0.*5 | ****0 | ***0x***0x***0 |
Z**5W | **0x**0x**0 | **0x**5 | ***0 | **0 | **0 | **0 | ******0 | 0.*0 | ****0 | ***0x***0x***3 |
Z**5WB | **0x**0x**0 | **0x**0 | ***0 | **0 | **0 | **0 | ******0 | 0.*0 | ****0 | ***0x**0x***0 |
Z**6W | **0x**0x**0 | **0x**0 | ***0 | **0 | **0 | **0 | ******0 | 0.*0 | ****0 | ***0x**0x***5 |
Z**6WB | **0x**0x**0 | **0x**0 | ***0 | **0 | **0 | **0 | ******0 | 0.*0 | ****0 |
Pays: | China |
N ° de modèle: | Z14 |
Prix FOB: | 1000 ~ 20000 / Set Obtenir le dernier prix |
Localité: | China |
Prix de commande minimale: | 1000 per Set |
Commande minimale: | 1 Set |
Packaging Detail: | wooden box, steel structure or as customer's requirement |
Heure de livraison: | - |
Capacité de Fournir: | 100 Set per Month |
Payment Type: | T/T |
Groupe de produits : | foundry machine |