La description

Tooling Blocks simultaneously provide multiple faces to hold components accurately in vertical plane for machining on Horizontal machining centres. Upon indexing of table a new face with new components is obtained for machining resulting into significant reduction of downtime by elimination of multiple set ups. Pallet mounting tooling blocks also enable simultaneous loading and unloading of multiple fixture plates thereby reducing total set up time. Tooling Blocks can also be used for vertical clamping of components on Horizontal Boring Machines, Milling Machines, Horizontal Jig Mills etc.

SALIENT FEATURES

• Made from plain close grained gray cast iron conforming to Grade FG: **0 of IS: **0 and having hardness within **0 to **0 BHN.

• Castings stress relieved to relieve internal stresses.

• Machined / Hand scraped surface finish.

• Tooling Blocks working (Vertical Block) faces offered with either (or combinations upon request) -T-slots, Holes or both as well as plane face only.

• T-Slots are of *8mm and have H8 tolerance

• Tapped holes are of *6mm size. Helicoil inserts can also be provided, if required, at extra cost,

• Bottom base provided with counter bored holes for fixing / clamping on machine pallet

• Offered in two grades of accuracies as under.

Grade 1: Flatness, squareness and parallelity of vertical working faces within *5 microns over **0 mm. Equality of depth of vertical faces from sides within *0 microns.

Grade 2: Flatness, squareness and parallelity of vertical working faces within *0 microns over **0 mm. Equality of depth of vertical faces from sides within **0 microns.

STANDARD SIZE OF JASH TOOLING BLOCKS

* Note – Other sizes as per customer’s specific requirement also offered, upon special request.