JA201# Polyurethane Resin By SHENZHEN HONG YE JIE TECHONOLOGY CO., LTD,

JA201# Polyurethane Resin

Pays:

China

N Â° de modÃ¨le:

Prix FOB:

(Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

Commande minimale:

Packaging Detail:

Heure de livraison:

Capacité de Fournir:

Payment Type:

Groupe de produits :

La description

JA**1# Polyurethane Resin

1.    Description
JA**1# polyurethane resin is a polymer material developed materialï¼Œ room temperature curingï¼Œ two-component, with low viscosity, small odor, soft, transparent glue. For its good advantages of Wear resistance, yellowing resistance, UV resistance and never hardens,it is widely used for outdoor application.

2    Application
1)Used in aviation, railways, construction, sports and other aspects;
2)Surface varnish for wooden furniture and metal;
3)Insulation for storage tanks, pipes, cold storage, beer, fermentation tanks, cold preservation barrels
4)Waterproof for building insulation
5)Used for prefabricated polyurethane sheet
6)For the products making of plastic products, wear-resistant synthetic rubber,  synthetic fibers, hard and soft foam products
7) For adhesives and coatings;such as for :all types of wood, chemical equipment, telecommunications equipment and instrumentation and surface finishing of various means of transport, toys, handicrafts, hand model, gifts, etc.

3.    Technical Parameters

Code:   JA**1#
Mix Ratio:  A:B=1:1
Shrinkageï¼š 0.*2%*0.*5%
Hardnessï¼š ****0A
Viscosityï¼ˆMPa.s*5â„ƒï¼‰ï¼š *******0ï¼Œ********0
Viscosity after Mixedï¼š *******0
Operation timesï¼š ****0mins
Yellowing resistance

4.    Characteristics
ï¼ŠGood radiation resistance , yellow resistance and good hardness, it is very  suitable for outdoor products
ï¼ŠGood resistant of UV and aging
ï¼ŠNon change hardness, not easy broken, no shrinkage and non deformation ,and good adhensive  ,and good sunshine resistance for the long time using
ï¼ŠLow viscosity, and good leveling

5.    Operation instructions
1. Operated under the conditions of ventilation environment.
2. Prepare the tools , and make sure it is clean ,dry . Un-oil ,and not contact with any chemical Solvent
3. Weigh part A and part B exactly ( multi-component part A will leads to the bottom of the bubble, multi-component B may cause surface sticky).
4. Carefully stir in the same direction to avoid a large number of bubbles,  you need patience and stir until completely transparent.
5. Vacuum Pumping : Vacuum pumping by vacuum machine

6.   Warm tips :
  1 The humidity should less than *0% if using by hand , you would better to use a dehumidifier
  2 You would better to use metal or plastic tools instead of wooden articles .
  3  You should make sure your products is very dry , and can not use inks containing glycerol.
  4 This product (especially B glue) cant contact with skin , otherwise please wash with plenty of water and soap
  5 Resin will be cured with High temperature and cured very fast
  6 Far away from children to prevent eating.

7.   Package

2KG/Set or *0KG/set packing

8.   Shelf life
Six (6) months when stored under dry and cool place by original package under *5â„ƒ


Need any help on composite materials, please feel free to contact Ms Aimee:
Tel: ****************8
Mail: hyjcchang(at)szrl(dot)net
Mobile:***************4
Skype:hy-siliconerubber
Welcome to our website: 3w(dot)resinpu(dot) net

Pays:	China
N Â° de modÃ¨le:	-
Prix FOB:	(Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	-
Commande minimale:	-
Packaging Detail:	-
Heure de livraison:	-
Capacité de Fournir:	-
Payment Type:	-
Groupe de produits :	-