La description

DSLAM***8v3 is a special pizza box designed for outdoor application with the physical depth about **0mm and the operating temperature up to *0°C . It terminates all the ATM circuits and converts traffic directly to deliver the most popular broadband IP services.

DSLAM***8v3 offers better bandwidth utilization, ease of use,as well as the low-cost advantage and provides the least initial investment solution for internet service providers who want to start providing broadband service in a low subscriber density location.

DSLAM***8v3 is compliant with ITU G.**2.5, G.**2.3,G.**2.1, and backwards compatible with early version of ADSL.Its maximum downstream/upstream rate is up to *4/1.2Mbps and maximum reach distance is over 6Km. It is most suitable to provide high speed Internet access on existing copper twisted pair telephone lines.

With the highly compact (1U height) and temperature-hardened design, simple installation and easy adaptation to local POTS/ISDN splitter requirements,DSLAM***8v3is an ideal solution for Triple-play requirements deployed in indoor and outdoor enclosures.

ADSL2+ Interfaces:

●  *8 ADSL/ADSL2/ADSL2+ Ports with splitter built
●  Supports ANSI T1.**3 Issue 2, ITU G.**2.5, G.**2.3,G.**2.1 (G.dmt), ITU-T G.**2.2 (G.lite)
●  Provides optimal rate/reach performance
●  Rates up to *4.0 Mbps
●  Distance up to 6.0 Km
●  Multimode (automatic modulation detection)
●  Supports packets transmit and receive statistics report
●  Bandwidth Management control on each port at *2kbps interval
●  Extended power management capabilities to optimize power consumption for each application

Management
●  Web-based management
●  SNMP-based GUI EMS
●  Local RS***2 CLI
●  Remote in-band SNMP/TELNET management
●  Firmware upgradeable via FTP or TFTP

Protocol Support
●  IGMP snooping/ GMRP/ GVRP/ LACP
●  SNMP/UDP/IP/MAC/Ethernet

System Features:

●  2 *0/**0/***0 BASE-TX ports, one for uplink and another one for cascade
●  Support up to 8 units to be cascaded
●  SNMP Management Agent and MIB II
●  TFTP
●  BOOTP Client, Boot Server
●  IP packet size *4 byte to ***2 byte
●  PPPoE Intermediate Agent
●  DHCP Relay Agent
●  8 VCs per ADSL port
●  Support multiple PVC QoS configuration
●  **8 MAC address per ADSL port
●  *8***8 MAC address
●  Bridging
     1. Ethernet Bridging – Broadcast, Flooding/ Dropping.
     2. VLAN bridging
         A. **2 VLAN support
         B. Static VLAN
         C. VLAN Stacking
         D. VLAN Trunking
●  Multicast
     1. Up to **6 multicast addresses
     2. IGMP v1, v2, v3
     3. Multicast VLAN mapping
         A. Independent VLAN multicast (IVM)
         B. Shared VLAN Multicast (SVM)
     4. handle PPPoE Encapsulated IGMP
●  Security
     1. Throttling Control
     2. Sticky Bridge Ports
     3. MAC Address Access Control List
     4. IP Address Access Control List
●  Inter-Working
     1. IPoA to IPoE Tunneling
     2. PPPoA to PPPoE inter-working
●  QoS
     1. Input Rate Limiting (IRL) on a per-AAL5 Interface
     2. Output Rate Limiting (ORL) on a per ATM-port and Ethernet basis
     3. Rate Limiting

Hardware Configuration
●  2 RJ*5 for Uplink and Cascade
●  2 TELCO**0 connectors for **-port ADSL/ADSL2/ADSL2+
●  2 TELCO**0 connectors for phone line
●  1 RJ*5 interface for Local Management

Input Power
●  AC Power Model: *0VAC ~ **0 VAC, ****0 Hz
●  DC Power Model: **0VDC ~ **0 VDC
●  Power Consumption: *0 watts

Operation Parameters
●  Operating Temperature: **0 to *0°C
●  Storage Temperature: **0~**5°C
●  Operating Humidity: 5% to *5% non-condensing
●  Operating Altitude: ***0ft.to **5,**0ft
●  Reliability: MTBF **0,**0 hrs minimum

Physical Specification
●  Dimensions: **0mm(W) x **0mm(D)in x *4.5mm(H) 
●  Weight: 6.0Kg