Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
china
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
T/T, D/P
Groupe de produits :
China
Personne àcontacter Ms. Liang
No. 159 Chengjiang Middle Road, Wuxi, Jiangsu
Injection molding machine
1. Lower cost
2. Highly performance;
3. Saving energy
4. High successful rate
5. Longer using life
6. Perfect after-service
ÂÂ
| INJECTION UNIT |  | A | B | C |
| SCREW DIAMETER | mm | *5 | *0 | *5 |
| SCREW L/D RATIO | L/D | *2.5 | *1.5 | *0 |
| SHOT VOLUME(THEORETICAL) | cm3 | ***1 | ***8 | ***0 |
| INJECTION WEIGHT(PS) | g | ***6 | ***0 | ***9 |
| INJECTION RATE | g/s | **7 | **8 | **2 |
| INJECTION PRESSURE | Mpa | **6 | **0 | **8 |
| SCREW SPEED | rpm | **0 | ||
| CLAMPING UNIT | ||||
| CLAMP FORCE | kN | ***0 | ||
| OPEN STROKE | mm | **0 | ||
| SPACE BETWEEN TIE BARS(W*H) | mm | **0x**0 | ||
| MAX.MOULD HEIGHT | mm | **0 | ||
| MIN.MOULD HEIGHT | mm | **0 | ||
| EJECTOR STROKE | mm | **0 | ||
| EJECTOR FORCE | kN | *0 | ||
| OTHER | ||||
| MAX.PUMP PRESSURE | MPa | *6 | ||
| PUMP MOTOR POWER | kW | *7 | ||
| HEATING POWER | kW | *4.7 | ||
| MACHINE DIMENSION(L*W*H) | m | 7.*1x1.*0x2.*4 | ||
| OILTANK CUBAGE | L | **0 | ||
| MACHINE WEIGHT | ||||
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | china |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | T/T, D/P |
| Groupe de produits : | molding machine |
