Prix FOB
Obtenir le dernier prix1 ~ 3 / Piece
|10 Piece Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
1 ~ 3 / Piece Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
1 per Piece
Commande minimale:
10 Piece
Packaging Detail:
cartons and pallets
Heure de livraison:
5 working days
Capacité de Fournir:
900000 Piece per Month
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter Mr. Bancku
No. 258 Guangcun Rd. Nanqiao T, Shanghai, Shanghai
         Item |                                Features |
     Temperature |          (*6V ~ **0V)  **0°C ~ ***5°C  (**0 ~ **0V)  **5°C ~ ***5°C |
      Voltage Range |                               *6V ~ **0V |
   Capacitance Range |                      *8uF ~ *7,**0uF     *0°C,**0Hz |
 Capacitance Tolerance |                                  ±*0% |
    Leakage Current |
≤0.*1CV (C: Rated capacitance; V: Rated voltage) or 1.5mA, which ever is the smaller,  5 minutes test at *0°C. |
    Maxinmun DF |                            0.*5   at *0°C, **0Hz |
 Temperature Features |                           C (**5°C )/C(**0°C )≥0.6 |
  Insulating Resistance |
The value measured by applying DC **0V insulation resistance tester between all terminals and snap ring withinsulating sleeve ≥**0MΩ |
  Insulating Voltage |
Apply AC 2,**0V between all terminals and snap ring with insulating sleeve for 1 minute and no abnormality appears. |
     Durability |
Apply rated ripple current on capacitor with
voltage not more than rated voltage under **5°C
environment and apply rated voltage for 3,**0 hours, then recover
to *0°C environment and the test results should satisfy
the requirements as below Capacitance change rate (C)≤initial value±*5% DF(tgδ)≤**0% of inital specifications value Leakage current ≤inital specifications value |
High-temperature Zero Load Feature |
capacitor is kept in **5°C
environment for 1,**0 hours, then test in *0°C environment
and the test results should satisfy the requirements as
below Capacitance change rate (C)≤initial value±*5% DF(tgδ)≤**0% of inital specifications value Leakage current ≤inital specifications value (Voltage pretreatment should be done before test: apply rated voltage on both ends of capacitor through a resistor about 1,**0Ω for 1 Hrs, then discharge electricity through 1Ω/V resistor after pretreatment. Place capacitor under normal temperature for *4 Hrs after total discharging, then starts test. |
Pays: | China |
N ° de modèle: | - |
Prix FOB: | 1 ~ 3 / Piece Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | 1 per Piece |
Commande minimale: | 10 Piece |
Packaging Detail: | cartons and pallets |
Heure de livraison: | 5 working days |
Capacité de Fournir: | 900000 Piece per Month |
Payment Type: | L/C, T/T |
Groupe de produits : | Snap in Capacitor |