Prix FOB
Obtenir le dernier prix0.01 ~ 0.4 / Piece
|5000 Piece Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
0.01 ~ 0.4 / Piece Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
0.01 per Piece
Commande minimale:
5000 Piece
Packaging Detail:
By Carton or Pack According to Your Requirements
Heure de livraison:
20days
Capacité de Fournir:
10000 Piece per Month
Payment Type:
T/T
Groupe de produits :
Personne àcontacter Ms. Siri
Yicheng, Wuxi, Jiangsu
1. Material: Steatite ceramic
ÂÂ
Performance | |||||
Item | Index | Unit | Steatite ceramic | *5 Al2O3 | *6 Al2O3 |
Physical Characteristics  | Bulk density   | g/cm3 | 2.7 | 3.6 | 3.6 |
Water absorption   | % | 0 | 0 | 0 | |
Mechanical Characteristics  |
Flexural strength | Mpa | **5 | **0 | **0 |
Hardness Vickers | Gpa | 5.7 | *2.2 | *3.5 | |
Elastic modulus | Gpa | **0 | **0 | **0 | |
Poisson’s ratio | - | 0.*1 | 0.*2 | 0.*3 | |
Thermal Characteristics | Linear expansion coefficient | *****00C      *0*6/0C | 7.9 | 7.1 | 7.2 |
Thermal conductivity | w/(m.k) | 2.5 | *6 | *4 | |
Specific Heat   | **0*3J/(kg*K) | 0.*5 | 0.*8 | 0.*8 | |
Electrical Characteristics | Dielectric constant(1MHZ) | - | 6.2 | 9 | 9.4 |
Dielectric loss angle | **0*4 | *8 | *5 | 5 | |
Dielectric strength | **06V/m | *8 | *2 | *5 |
ÂÂ
2. Advantages:
ÂÂ
1). *5% alumina or steatite ceramic.heat compression molding,the
alumina has been to improved insulation and mechanical
strength.
ÂÂ
2). The ceramics have no cracks,no burrs,no pinholes,noÂÂ
gaps,and no impurities, surface is smooth, dye absorption is
passed.
ÂÂ
3).Linear dimension tolerance ≤ ± 0.*5mm, diameter tolerance ≤
± 0.1mm, hole size distortion ≤ 0.*5mm, circumference
deformation size ≤ 0.1mm.
ÂÂ
4). Insulation Resistance ≥ **0MΩ (have been
checked by megohm in DC**0V).
5).
Dielectric Strength: AC***0V/*0HZ/1min no breakdown
phenomenon.
6).
Linear expansion coefficient is slight,and less than 7.0 × ***6mm
/°C, and good for thermal shock performance.
ÂÂ
7). Sintering temperature is ***0 °C, the use of a
temperature not lower than ***0 °C, good corrosion
resistance.
ÂÂ
3. Application: ÂÂ
  They are widely used for the halogen lamps, iodine-tungsten lamps, high and low pressure uv lamps, mercury lamps, uv lamp holders and all kinds of heating tubes. ÂÂ
ÂÂ
4. About us:
 Shenxing Technology is
engaged in R&D, design, manufacture, construction, and
operations for technical ceramic parts and components. LED
lighting ceramic, electrothermal ceramic, ceramic resistors,
electronic ceramic, steatite ceramic, zirconia ceramic, alumina
ceramic and etc. are our main products. These products have good
insulation and thermal conductivity. The advantages are
irreplaceable. They are applied to power, high-frequency induction
welder, audio, computer, LED, bathrooms,
etc.                                                                                                              ÂÂ
  Shenxing
Technology operates and maintain a Quality Assurance Management
System fully meeting ISO***1:***8.We can produce products according
to your drawings or samples. Welcome you contact us for more
information.I hope Shenxing can have the chance to give you the
best
service.                                                                                                             ÂÂ
  Thank you and
best regards.
  Siri Lu
Pays: | China |
N ° de modèle: | - |
Prix FOB: | 0.01 ~ 0.4 / Piece Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | 0.01 per Piece |
Commande minimale: | 5000 Piece |
Packaging Detail: | By Carton or Pack According to Your Requirements |
Heure de livraison: | 20days |
Capacité de Fournir: | 10000 Piece per Month |
Payment Type: | T/T |
Groupe de produits : | Ceramic lamp holders and bases |