La description
Industrial Belt
Special CR treated outer jacketing fabric for higher
durability
Â
Product Description
Features
Special CR treated outer jacketing fabric for higher
durability
Anti-static, oil & heat resistant
Maximum Belt linear speed (Classical section: up to *0 m/sec,
Wedge section: up to *2 m/sec, Narrow section: up to *5
m/sec)
Temperature range: **8°C to **0°C
ATEX certified FRAS Belts are also available
Constructional Details
Wear-resistant bias-cut neoprene rubberised polyester cotton
fabric
High tensile cord embedding cushion rubber compound
High tenacity, low stretch, specially treated polyester
cords
Especially compounded high modulus compression rubber
Â
Product Specifications of Higher Durability Industrial
Belt
Section Top Width (mm) Thickness (mm) Angle (Degree) Min.
Pulley Dia. (mm) Manufacturing Range Belt Length Factor (mm) Length
Desg.
Min. (inch / mm) Max. (inch / mm) Lp to La Li to Lp Li to
La
Classical Section
Z *0 6 *0 *0 *0 / ***0 **0 / ****0 *6 *2 *8 Li
A *3 8 *0 *1 *0 / ***0 **0 / ****0 *4 *6 *0 Li
B *7 *1 *0 **2 *0 / ***0 **0 / ****0 *6 *3 *9 Li
C *2 *4 *0 **0 *0 / ***0 **0 / ****0 *2 *6 *8 Li
D *2 *9 *0 **5 *0 / ***0 **0 / ****0 *0 *9 **9 Li
E *8 *3 *0 **0 *0 / ***0 **0 / ****0 *3 *2 **5 Li
Wedge Section
SPZ *0 8 *0 *3 *0 / ***0 **0 / ****0 *3 *7 *0 Lp
SPA *3 *0 *0 *0 *0 / ***0 **0 / ****0 *8 *5 *3 Lp
SPB *7 *4 *0 **0 *0 / ***0 **0 / ****0 *8 *0 *8 Lp
SPC *2 *8 *0 **4 *0 / ***0 **0 / ****0 *0 *3 **3 Lp
Narrow Section
3V 9.7 8 *0 *3 *0 / ***0 **0 / ****0 *3 *7 *0 La
5V *5.8 *4 *0 **0 *0 / ***0 **0 / ****0 *5 *0 *5 La
8V *5.4 *3 *0 **5 *0 / ***0 **0 / ****0 *3 *2 **5 La
Â
We are Industrial Belt Manufacturer.
Â
ZX AX BX CX
Classical Raw Edge Cogged V-Belts
Moulded Raw Edge Cogged Belts, as the name implies do not have
textile wrapping on the outer surface. These are produced by
slitting individual belts from rubber sleeve and hence they are
called as Cut edge belts.
The manufacturing methods also make it simpler to produce
belts with cogs underside thereby reducing the bending resistance
of the belts and allowing them to operate on pulleys with
approximately *0% smaller diameters. The decreased bending
resistance reduces mechanical losses during bending and leads to
improved efficiency and reduced working temperature. Heat
dissipation is further improved by the larger area between the belt
and the surrounding atmosphere and also by the air turbulence
around the cogs during operation. Multi stage drives can be
eliminated. These belts require a higher tension than the wrap
belts so as to exhibit higher power transmission capability.
Â
Features
• Special top layer with fabric
• Tough tensile member for greater strength
• Molded Cogs
• Polychloroprene cushion rubber compound
• Fiber filled polychloroprene base compound
• Speed ratios up to 1:*2 are possible: This eliminates the
need formulti stage drives
• Temperature range: **8oC to ***0oC
• Maximum recommended belt speed is *0 m/s*
• Antistatic, oil and heat resistant
Â
Advantages
The advantages of Raw Edge Moulded Cogged Belts over Wrap
Belts are of great importance in following cases-
1. Drives with very small pulley diameters
2. High ambient temperatures
3. High belt speeds
4. High level of power transmission
Â
Applications
It is recommended to use these belts in borderline cases if
difficulties are anticipated in using wrap construction belts
Primarily used as replacement on industrial drives. The
classical belts are recommended in special applications such as
V-flat drives. In the same manner these belts are advantages where
reverse idlers have to be used, because of smaller heights.
Â
Standards & Dimension:
Section Top Width Thickness Angle Manufacturing Length
Range
(mm) (mm) (Deg) Min. (inch/mm) Max. (inch/mm)
ZX *0 6 *0 *0 / ***0 **6 / ***0
AX *3 8 *0 *0 / ***0 **6 / ***0
BX *7 *1 *0 *0 / ***0 **6 / ***0
CX *2 *4 *0 *0 / ***0 **3 / ***0
Â
| Pays: |
China |
| N ° de modèle: |
-
|
| Prix FOB: |
( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
China |
| Prix de commande minimale: |
- |
| Commande minimale: |
100 Piece |
| Packaging Detail: |
Wooden carton |
| Heure de livraison: |
30 days after comfirmation |
| Capacité de Fournir: |
100000 Piece per Year |
| Payment Type: |
L/C, T/T |
| Groupe de produits : |
narrow v belt
|
