Prix FOB
Obtenir le dernier prix|
1 Piece Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Piece
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter Ms. Hong
F1-Room106, Gongle Fenghe Guard, Xi Xiang Town, Ba, Shenzhen, Guangdong
IEC****5 Electrical Safety Needle Flame Test Chamber Â
ÂÂ
Â
Application
Insulation and combustible materials used inside electrical and
electronic products may propagate flames when a failed component
ignites, which may develop into a fire that endangers the safety
of operators and product operation. The Needle Flame Tester is
used to assess the fire hazard of such component materials. The
test is performed to determine that the test flame does not cause
ignition of parts, or that a combustible part ignited by the test
flame has a limited duration of burning or a limited extent of
burning, without spreading fire by flames or burning or glowing
particles falling from the test specimen.
Â
Â
Instrument
The Needle Flame Tester is a fully automatic instrument
contained in its own cabinet to maximize the safety of the
operator. The Needle Flame Tester consists of a 0.9mm needle
burner that tilts to *5♦ from the vertical and is fueled with
butane gas. The test time for the temperature of the standard
copper block to increase from **0♦C ♦5♦C to **0♦C ♦3♦C shall be
*3.5s ♦1.0s. Test flame height is adjusted *2mm ♦1mm.The fire
hazard of the specimen is assessed by measuring the burning
duration of the specimen, and any ignition of the wrapping tissue
and white pine board below the specimen. The instrument is
designed to conform to IEC*********5, IEC********2 and other most
commonly used standards in the market.
Â
Â
Features
•Self contained cabinet with large viewing window gives a
draft-free test
•Dark interior cabinet color for better test viewing
•Easy access to testing area during setup
•Safety interlock on door halts test if the door is
opened
•Internal cabinet light can be turned on during test setup and
shut off to give better viewing during the test
•Convenient built-in flame measurement scale
•Built in exhaust fan and control
•Control panel has all controls in easy reach including lighting
and exhaust
•Automatic electronic flame ignition with type K thermocouple and
temperature control to automatically measure, verify, and adjust
the flame temperature and rate of rise time.
•Touch Screen Controller
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Piece |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
