HY-9055 of Electronic Potting Silicone Rubber

Prix FOB

Obtenir le dernier prix

6 ~ 10 / Kilogram ( Negotiable )

200 Kilogram Minimum Order

Pays:

China

N Â° de modÃ¨le:

HY-9055

Prix FOB:

6 ~ 10 / Kilogram ( Negotiable )(Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

6 per Kilogram

Commande minimale:

200 Kilogram

Packaging Detail:

25kgs/drum, 200kg/drum

Heure de livraison:

within 3 days

Capacité de Fournir:

8000 Kilogram per Day

Payment Type:

Groupe de produits :

Electronic Potting Silicone

Contacter maintenant

ShenZhen Hong Ye Jie Technology Co., Ltd

China

Membre gratuit

Personne Ã contacter Miya

Guangzhou, Guangdong

Contacter maintenant

SpÃ©cification du produit

Place of Origin:Guangdong, China (Mainland)
Certificate:MSDS, Rosh, SGS, ISO-9001, FDA
Free technical support::Available
delivery:within 3 days
sample:Available
Payment Terms:L/C,T/T,Western Union
Price Condition:FOB,CIF

La description

1. Product Feature of Electronic Potting Silicone Rubber
HY-***5 silicone rubber is a kind of low viscosity, Inherent flame resistance, two components addition cured potting silicone with heat-conducting. It cures with both on room temperature and heated temperature. It has the feature of the higher temperature the faster of the curing time. It can be applied to electronic components for insulation, waterproofing, fixed and flame retardant. It mainly applied in electronic components surface with materials of PC(Poly-carbonate)ã€PPã€ABSã€PVC, etc. and metal materials.

2. Typical Application of Electronic Potting Silicone Rubber
HY-***5 electronic potting silicone rubber could be applied to
- high powered electronics,
- DC/DC module and circuit board which requires heat dissipation and high temperature resistance.
-It can be broadly used for LED screen, Wind Power Generator, PCB substrate, etc.

3. Technical Guidelines of of Electronic Potting Silicone Rubber
a, Pls put part A and part B in separate container and stir evenly before mixing the two part together.
b, Mixing Ratio: part A: part B = 1:1
c, Deaeration the mixture in vacuum pump under 0.*8 MPa for **5 minutes.Then the mixture could be used for pouring.

Note: The thickness of the silicone affects the curing time. If the silicone used is a little thick,then the curing time will be a little longer.The temperature also affects the curing time.When in lower temperature, we suggest customers appropriately heat the mixture to accelerate vulcanization. With temperature of *0ï½ž**0â„ƒ, the silicone will cure in *5 minutes; while in *5â„ƒ room temperature, the silicone will cure around 8 hours.

4.Notes of Electronic Potting Silicone Rubber
a.The following material may hinder the curing of HY-***5, So pls use after the test. When necessary, pls clean the application areas.
Organotin compound or Condensation silicone with organotin
Sulphur, sulfide and sulfur rubber materials.
Amine compounds as well as contains the amine materials.
Pewters solder flux
b. HY-***5 should be sealed storage.The mixture should be used up disposably to avoid causing waste.
c. HY-***5 belongs to non-dangerous goods, but keep away from mouth and eyes.
d. When it gets stratified after a period of storage, Please mix it evenly before using,which does not affect the performance.

Technical Parameters of of Electronic Potting Silicone Rubber

Features		Part A	Part B
Before Curing	Appearence	Gray Fluid	White Fluid
	Viscosistyï¼ˆ*5â„ƒcpsï¼‰	*0±0	*0±0
Operation features	Mixing Ratio	1ï¼š1
	Viscosisty(after mixing) ï¼ˆcpsï¼‰	*0ï½ž*0
	Operating Timeï¼ˆ*5â„ƒ hrï¼‰	**0
	Curing time ï¼ˆminï¼Œ*5â„ƒï¼‰	**0
	Curing timeï¼ˆ*0â„ƒ hrï¼‰	*0
After Curing	Hardnessï¼ˆShore Aï¼‰	*5±5
	Thermal conductivity [Wï¼ˆm·Kï¼‰]	≥0.8
	Dielectric Strengthï¼ˆKV/mmï¼‰	≥*5
	Permittivityï¼ˆ1.2MHzï¼‰	3.0ï½ž3.3
	Volume Resisivityï¼ˆΩ·cmï¼‰	≥1.0×***6
	linear expansibility [m/ï¼ˆm·Kï¼‰]	≤2.2×***4
	Fire Resistance	**-V1

(Pls note: the above data for this product in *5 â„ƒ temperature, *5 percent humidity conditions, for reference. The accurate data is measured by customers when using.)

PACKAGE
40Kg/pail as a set (Part A 20Kg + Part B 20Kg)

SHELF LIFE AND TRANSPORTATION
1. Twelve(*2) months when stored at *4C in tightly closed original packages.
2. This kind of product is non-dangerous product, which could be transported as general chemicals.
3. Storage beyond the expired date doesnot necessarily mean that the product is no longer usable. In this case however, the properties required for the intended use must be checked for quality assurance reasons.

More information about silicone rubber, pls contact Ms Miya:

Pays:	China
N Â° de modÃ¨le:	HY-9055
Prix FOB:	6 ~ 10 / Kilogram ( Negotiable ) (Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	6 per Kilogram
Commande minimale:	200 Kilogram
Packaging Detail:	25kgs/drum, 200kg/drum
Heure de livraison:	within 3 days
Capacité de Fournir:	8000 Kilogram per Day
Payment Type:	-
Groupe de produits :	Electronic Potting Silicone