Prix FOB
Obtenir le dernier prix300 ~ 1500 /
|1 Set Minimum Order
Pays:
China
N ° de modèle:
Full-automatic water softener
Prix FOB:
300 ~ 1500 / Obtenir le dernier prix
Localité:
Jiangyin,Jiangsu
Prix de commande minimale:
300
Commande minimale:
1 Set
Packaging Detail:
Plywood case into container
Heure de livraison:
10-15 working days after payment is OK
Capacité de Fournir:
5000 Set per Year
Payment Type:
Money Gram, Western Union, D/P, T/T
Groupe de produits :
Personne àcontacter Jia
Wuxi, Jiangsu
Working
principle
To absorb the calcium and magnesium
ions in the water with resin. As the hardness of the water is
mainly formed and expressed by calcium and magnesium, the cation
exchange resin (water softener)is generally used to replaceCa2 +
and Mg2in the water The resin efficiency to removeca2 + and Mg2+
gradually reduces as ca2 + and Mg2 + in the resin increase. When
the resin absorbs a certain amount of calcium and magnesium ions,
it is necessary to be regenerated. In the regeneration process, the
resin bed is flushed by saline in the salt box and hardness ions on
the resin are replaced and discharged with recycled waste fluid,
the resin’s function of softening exchange is recovered. The
principle of sodium ion exchanging softening treatment is to use
sodium cation exchange resin to exchange the hardness ingredients,
Ca2 + and Mg2 +, in the raw water with Na + in the resin, absorbing
Ca2 + and Mg2 + in the water, so that water gets softened.
Control modes of automatic water softeners:
(1) Single tank time type: the time
control of microcomputer is used, so that the equipment is able to
automatically enter into the regeneration state after running for a
set period of time. The regeneration can be once a day or repeated
every day.
(2) Single tank flow type: the
turbine flow control or electronic flow sensor control is used, so
that the equipment is able to automatically enter into the
regeneration state when its water yield reaches a pre-set flow. The
regeneration can be repeated every day.
(3) Dual-tank flow type: it can be
divided into Mode? I with one tank for use and the other for
standby and Model llwith two tanks for simultaneous operation and
respective regeneration.
Model l: one tank runs and the other
one stands by. The running tank enters into the regeneration state
after its water outflow reaches a set flow and at the same time the
standby tank starts running, two tanks running and regenerating
alternatively for continuous *4 hours’ water supply.
Model II: two tanks run
simultaneously. The first tank continuously produces water while
the second tank regenerates first and restarts running after
regeneration, and then the first tank starts regeneration. After
both tanks finish regeneration, they run simultaneously
again.
Â
| Pays: | China |
| N ° de modèle: | Full-automatic water softener |
| Prix FOB: | 300 ~ 1500 / Obtenir le dernier prix |
| Localité: | Jiangyin,Jiangsu |
| Prix de commande minimale: | 300 |
| Commande minimale: | 1 Set |
| Packaging Detail: | Plywood case into container |
| Heure de livraison: | 10-15 working days after payment is OK |
| Capacité de Fournir: | 5000 Set per Year |
| Payment Type: | Money Gram, Western Union, D/P, T/T |
| Groupe de produits : | Water Softener |
