HMG100-TP Coal Shearer

La description

1. Brief Introduction

 

HMG***-TP  Hydraulic Haulage Shearer is the thinnest shearer in China. The body of  it is short and narrow. Its used in the coal seam  that is 0.4~0.9m ,coal property is medium-hard ( f ≤3) and the slope angle<*5°, the maximum  slope angle can be *5°as your requirement. When the slope angle>*8°,the machine needs to add the Non-slip winch. It can be used with scraper conveyors and hydraulic prop in the conventional mining working face.

2.Main Features

2.1 This hydraulic haulage shearer uses three tracks coal mining working. Because it can climb on the floor of whole body, the requirements for corollary equipment such as transport and support are not high.The cost of general machinery and equipment would be lower.

2.2 The machine itself has a loading mechanism. The coal cutted by spiral drum is transfered to conveyor by loading machine. And the result of coal loading is good.

2.3 The powerful motor power and good mechanical strength can cut hardish coal seam and with low gangue coal seam.

2.4 The body machine is short, and the thickness of machine is the thinnest in China compared with the same power shearers,the cutting height is lowest.

2.5 It is easy to operate for concentrated operators and s.

2.6 The tractive force is large. Hydraulic traction systems are reliable. Hydraulic components of good performance is easy to replace.

2.7 With spray device,the dust removal result is good.

2.8 The good performance shearer machine and the sample and reliable structure make coal shearer easy to maintain. It is suitable for small mines.

 

 

3. HMG***-TP Technical Parameters

 

No.	Item	Unit	Capacity
1	Mining height	mm	******0
2	Dip angle	。	< *0°
3	Coal hardness	f	≤3
4	Production capacity	t/h	*****0
5	The length of the machine	mm	***5
6	The height of the machine	mm	**0 (YR)/**0 (part**0)(YRA)
7	The width of the machine	mm	driving chain sprocket and drum shaft are not included in
8	Conveyor type		HSGD**0/*2 OR HSGB**0/*0
9	Machine height（including  joist *0）	mm	**0  ( YR)   /**0 ( part **0)(YRA)
*0	Output power	kw	**0
*1	Voltage	V	**0
*2	Total installed power		**0
*3	Rotate speed of drum shaft	r/min	**1
*4	Depth of cut	mm	****0
*5	Drum diameter		******0
*6	Mode of traction		Hydraulic anchor chain traction
*7	The specification of chain	mm	∮*8 x *4 ã€ âˆ® *2 x *6
*8	The breaking force chain	kN	**0 ã€**0 (C class)
*9	Traction speed	m/min	**4
*0	Traction	kN	**0
*1	Supporting form		Single hydraulic prop
*2	Weight		7.3