Prix FOB
Obtenir le dernier prix( Negotiable )
|5000 Roll Minimum Order
Pays:
China
N ° de modèle:
T009
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
5000 Roll
Packaging Detail:
as pic. or customized
Heure de livraison:
10-15days
Capacité de Fournir:
150000 Roll per Month
Payment Type:
T/T, L/C, Western Union, PayPal
Groupe de produits :
Personne àcontacter Mr. Aaron
Building 12,Olympic city,Feiyang road,Longgang district, Shenzhen, Guangdong
Product description
Armoring tape by my company independent research and development of
technology, special glass fiber woven into high strength, high
flexibility in the structure of the fabric, then in the weaving
with water surface coating and curing polymers and made of a
fiberglass products. It has the characteristics of fast curing,
easy operation and wide application range, and the structure of the
cured structure is characterized by high tensile strength, high
tensile strength, non-toxic, tasteless, no stimulation, water
resistance and corrosion resistance. Because of its easy to use,
easy to carry, and arbitrary shaping, in recent years has
increasingly is applied to power communication cable accessories,
chemical, marine, mining, automobile manufacturing, shipbuilding,
statues, medical and other fields.
Armor with a sealed in plastic composite bag, that is used to open,
no need of special equipment, simply bandages soaked in water for a
few seconds and direct bandaging in cable accessories or cable can
be within 10 minutes of complete curing. After 30 minutes can be
load-bearing, 1 hour after the can body now perfect mechanical
protection performance.
Application: it is suitable for the reinforcement of the outer
protecting layer of the cable and the reinforcement of the cable
joint and the terminal. Fast water curing or air curing, no odor,
non-toxic, not easy to burn, durable, durable, corrosion
resistance, high insulation, easy to use, is a special environment
for the maintenance of structural repair, protection, corrosion
resistance, cable sealing splicing and high temperature use of the
ideal materials. Mainly used for waterproof layer of steel armor
cable intermediate joint restoration, protection and support to
joint structure. In addition to be wound on the metal surface,
prevent metal friction and prevent sparking sharp metal surface is
scratched.
1. Armoured belt (belt armor and armor belt) for power cable
industry in 10kV, 35kV single core or three core shrinkage cable
middle connector, can also be used for heat shrinkable cable
intermediate joint support.
2 repair with anti-seepage and mending leakage for fast leak
repair, especially pipeline repair. With the plastic soil,
universal repair etc. with the use of trap material, can increase
the pressure by repairing pipes.
3 metal surface insulation protection belt
Can replace the dusting and heat shrinkable sleeve, just wrapped on
the surface of the metal, you can form an insulating protective
layer, prevent metal frictional sparking and surface from being
scratched.
Cold 4 fixing belt for non inflatable communication cable the
continued contraction assure technology, ideal mechanical
protection of cable joint.
Operation steps: 1, clean the surface of the wound surface. Be sure
to wear gloves and then carry out the following operations, along
the V shaped groove in the packaging bag. 2, put the water into the
bag, squeeze out a few seconds after the tape, tape out excess
water. 3, winding.
If used for leak repair, the leakage plugging with traditional
plugging material. This step is omitted for other purposes. 2
armored belt along the 45 degree angle direction gradually rolling
winding, each around 1 / 3 of that circle of overlapping, and
slightly to be hard, wrapped after repeated touch pressure, surface
shaping, to increase the adhesive force and cured strength between
each layer. The case of diameter suddenly become big or suddenly
small place, can be folded belt wrapped armor. 4, in the same way
to wrap around 4 to 8 layers, the specific number according to
different applications have different. 4, at 20 degrees Celsius, 5
minutes to reach the Non Stick Hand state, 8 to 10 minutes can be
cured bearing, 1 hours after the complete cure can be
achieved.
Performance features:
Curing water and in the air can also slow curing temperature of 150
DEG C can stick to rubber, PVC, pet, metal, glass fiber and
concrete material within 10 minutes of fast curing, in water use
water, and most of the chemical solvent and fuel resistant to
mechanical abrasion resistant up to 10 kilograms of internal
pressures when almost no tension end head automatic jointing with
the high performance of packaging materials, is not easy to be
damaged.
Note: 1, if the ambient temperature is lower than 0 DEG C, to
achieve the curing effect and speed of, please to be wound and
armoured with preheating to 2 degrees Celsius above. 2, water
temperature 25 degrees Celsius, not more than 50. 3, must ensure
that the armored belt in contact with water use, otherwise it will
affect the curing after the bonding force and strength. 4, the end
of the tape do not stretch, should let the natural bonding. 5, the
armored belt ready to use, each time you open a bag (not open at
the same time, and the operating bags) within the prescribed period
of time. If it is not enough to open another bag continue to
operate. 6. The armored belt itself non-toxic, non irritating, but
should avoid not cured adhesive tape paste directly in contact with
the eyes or skin, so as not to cause discomfort. If you come into
contact with tape paste should be rapidly cloth wipe, and then with
acetone or alcohol cleaning, or to be curing the slurry will
scrape. 3, avoid kneading bags, packaging bags to prevent
breakage.
Transportation: to prevent leakage, direct sunlight and rain
leaching.
Storage: in the cool dark dry place, storage temperature of 10 to
30.
Period: three years from the date of production
Â
| Pays: | China |
| N ° de modèle: | T009 |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 5000 Roll |
| Packaging Detail: | as pic. or customized |
| Heure de livraison: | 10-15days |
| Capacité de Fournir: | 150000 Roll per Month |
| Payment Type: | T/T, L/C, Western Union, PayPal |
| Groupe de produits : | Other popular tapes |
