Prix FOB
Obtenir le dernier prix( Negotiable )
|- Minimum Order
Pays:
China
N ° de modèle:
OD 19mm/25mm/32mmï
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
Wooden box
Heure de livraison:
face to face
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne à contacter Mr. ALLEN
168 Jixin Road, Shanghai, Shanghai
High flux tube can be classified
into three groups: sintered high flux tube, sprayed high flux
tube and machined high flux tube. Among them, sintered high
flux tube is the most expensive for its complex processing
method and high efficiency; machined high flux tube is applied
to mediums with high surface tension, its performance is in
between; sprayed high flux tube is the cheapest for its easy
process and low efficiency.
On the one
hand, high flux tube can reduce the steam demand. On the other
hand, it can improve the heat transfer capability. In the large
heat transfer system, because of the need of small temperature
differences, the number of reboilers needed is very big. The
use of high flux tube can reduce 3/4 the amount of reboilers,
and temperature difference ΔT asks for only 5 ℃. Using high
flux tube to replace traditional bare tube can eliminate heat
transfer bottlenecks, meet the needs of larger heat load, and
significantly increase production. At the same time, under the
condition of keeping the same efficiency, it can reduce the
cost.
Material and size of High Flux Tube
Material: nickel-copper
alloy（C****0，B*0), carbon steel（SA**9,*0#）, aluminum
alloy (***3), stainless steel（**4L，**6L）and so
on.
Size: OD
*9ã€*5ã€*2mm，length ***0～****0 mm
Under normal condition, the middle of High flux
tube is enhanced section. Both ends are smooth. It is easy to
wear tubes and easy for expansion joints. We are OEM of high
flux tube and can produce according to customers' needs.
Products are packaged with wooden boxes.
Applicable medium of high flux
heat exchangers
Ethylene
glycol, light olefin, refrigerant, liquid oxygen, liquid
nitrogen.
Applications
of high flux heat
exchangers
High flux
heat exchanger can be used in phase change equipment, such as,
carburetor, evaporator, reboiler and condenser, etc.
Sintered High Flux Tube
Machined high flux tube is a kind of high efficient heat transfer tubes manufactured by rolling process of bare tubes, the structural features are a series of spiral-ring T type tunnel, which are formed in the outer surface of the tube.
Characteristic of machined high flux tube Machining is a
method with low cost and easy to process, and the porosity of
porous coating is **- *5%.
Sprayed High Flux Tube
The coating on sprayed high flux tube is formed by spraying guns which melt and spray the compound of Ni-wrapped Al powder and pore-forming materials. This can only process the outside surface of high flux tube, which has only *0% of heat transfer efficiency of sintered high flux tube, *0% service life of sintered high flux tube. But it is easy to manufacture and much cheaper.
| Pays: | China |
| N ° de modèle: | OD 19mm/25mm/32mmï |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | - |
| Packaging Detail: | Wooden box |
| Heure de livraison: | face to face |
| Capacité de Fournir: | - |
| Payment Type: | - |
| Groupe de produits : | - |
