High Elastic Thick Acrylic Waterproof Coating

High Elastic Thick Acrylic Waterproof Coating

Prix FOB

Obtenir le dernier prix

1.8 ~ 2.5 / Kilogram

5000 Kilogram Minimum Order

Pays:

China

N Â° de modÃ¨le:

HCA-101

Prix FOB:

1.8 ~ 2.5 / Kilogram (Negotiable) Obtenir le dernier prix

LocalitÃ©:

Prix de commande minimale:

1.8 per Kilogram

Commande minimale:

5000 Kilogram

Packaging Detail:

PLASTIC PAIL

Heure de livraison:

WITHIN 15 DAYS

Capacité de Fournir:

80000 Ton per Year

Payment Type:

T/T, L/C, Western Union, PayPal

Groupe de produits :

Construction Waterproof Coating

Contacter maintenant

Beijing Oriental Yuhong Waterproof Co.

China

Membre gratuit

Personne Ã contacter Even

Beijing, Beijing

Contacter maintenant

SpÃ©cification du produit

Brand Name: Yuhong

La description

HCA***1
High Elastic Thick Acrylic Waterproof Coating

Description
HCA***1 is a one component thick water-based polymer waterproof coating with high quality modified acrylic ester multicomponent copolymerized polymer emulsions as basic stock, added various auxiliary agents and fillers.

Where to use

Bathrooms;
Kitchens;
Balconies;
Floors.

Advantages

Water-based and eco-friendly emulsion without any organic solvents;
High intensity;
Good tensile strength and elongation;
Strong adaptability for substrate shrinkage, deformation and cracks;
Can be applied on wet substrates with tight bonding;
Available for one-time thick coating;
Ultraviolet radiation resisting, weather resisting and aging resisting;
Cold and convenient to apply.

Standards
JC/T*******8

Typical properties

Item		Requirement
Tensile strength, MPa ≥		1.0
Elongation at break, % ≥		**0
Flexibility at low temperature, ° C		**0° C, no cracks
Water tightness, 0.3MPa, 0.5h		Pass
Drying time	Surface dry, h ≤	4
Drying time	Fully dry, h ≤	8
Solid content, % ≥		*5
After ageing behavior tensile strength retention rate , %	Heat treatment ≥	*0
	UV treatment ≥	*0
	Alkali treatment ≥	*0
	Acid treatment ≥	*0
After ageing behavior elongation at break, %	Heat treatment ≥	**0

	UV treatment ≥	**0
	Alkali treatment ≥	**0
	Acid treatment ≥	**0
Heating distortion rate, %	Stretching ≤	1.0
Heating distortion rate, %	Shortening ≤	1.0

Packaging
HCA***1 is sealed in *5kg plastic casks and transported in wooden cases. Each wooden case can be contained *6 casks of HCA***1N.

Storage
HCA***1 material should be stored at dry places and protected from sun. The temperature in stored places must be higher than 0° C. The normal shelf life is *2 months.

Transportation
HCA***1 is needed to be avoided insolation.

Application System

Constructive System

The system is basically consisted of substrate, leveling course, waterproof coated membrane and protection layer.

Coverage

2.5kgper m2 gives dft 1mm minimum. Coverage may vary with the substrate condition during application.

Application Method

Surface preparation
Surfaces should be stable, clean, smooth, without obvious water and free from any dusts, oil or loose particles. Cracks and surface irregularities need to be filled by sealants and do additional waterproofing.

Additional layer
Paint HCA coating as additional layer to enhance at internal and external corners, drain pipes, floor drains or embedded parts. When it uses reinforced materials, reinforced materials need to be coated on both sides.

Application of waterproof coated membrane
It is better to paint 2 or 3 times. It must be painted again after fully dry. The normal time between each painting is 8 hours. The direction of second time painting needs to be perpendicular to the first time painting.

Coated on the finished layer
Some water added in HCA will make surface more smooth and glabrous.

Application of protection layer
After waterproof coated membrane is fully dry and meets quality requirements, it can begin application of protection layer.

Pays:	China
N Â° de modÃ¨le:	HCA-101
Prix FOB:	1.8 ~ 2.5 / Kilogram (Negotiable) Obtenir le dernier prix
LocalitÃ©:	-
Prix de commande minimale:	1.8 per Kilogram
Commande minimale:	5000 Kilogram
Packaging Detail:	PLASTIC PAIL
Heure de livraison:	WITHIN 15 DAYS
Capacité de Fournir:	80000 Ton per Year
Payment Type:	T/T, L/C, Western Union, PayPal
Groupe de produits :	Construction Waterproof Coating