HID xenon projector light-Auto By Guangzhou Matec Electronic Co.,Ltd,
Pas encore membre de TradeKey.com? Inscrivez-vous pour vous connecter avec 9 millions d'importateurs et exportateurs.
Rejoignez-le maintenant c'est gratuit |
BOOK A CALL
Book Call On Your Favorite Time

By Signing Up. I agree to TradeKey.com Terms of Use, Privacy Policy, IPR and receive emails related to our services

Contact Us
product
Prev
HID xenon projector light-Auto
Next

HID xenon projector light-Auto

30 ~ 50 / Set

|

10 Set Minimum Order

Pays:

China

N ° de modèle:

hid projector lights

Prix FOB:

30 ~ 50 / Set Obtenir le dernier prix

Localité:

Guangdong, China (Mainland)

Prix de commande minimale:

30 per Set

Commande minimale:

10 Set

Packaging Detail:

soft/hard/netural/aulminum case, etc.

Heure de livraison:

next day for sample dispatch and whthin 3 days for

Capacité de Fournir:

50000 Set per Month

Payment Type:

PayPal, Western Union, L/C, T/T

Groupe de produits :

Contacter maintenant
Membre gratuit

Personne à contacter Cherry-candicemo

Address:No.1 Yinlandong Rd,Xiejiazhuang,Taihe Town,Baiyun Distric, Guangzhou, Guangdong

Contacter maintenant

La description

HID xenon projector light

 

First: Open the trunk 
Second: Remove the negative cable from the battery using the *0mm wrench. To get at it you have to remove the panel on the drivers side that holds the first aid kit. Most US cars do not have the kit so it’s just empty inside. You will see a cutout in the trunk liner, give it a tug and you will have access to the rear of the taillight.

Remove ONLY the connector with the 4 large wires. You remove the connector by pulling back on the green tab and pulling the connector out. Some pliers used gently helps on this. You can see the upper *0mm nut in this photo. After removing the upper and lower *0mm nuts you can now pull out the taillight. You will have a hole in your car like this. To install the new light simpily insert it into the hole and snug down the *0mm nuts. DO NOT OVERTIGHTEN. They only need to be snug. Do not re-install the wiring harness. Do the same to remove and install the passenger side. You will be looking at something like this. To remove the harness squeeze on the tabs on each side of the connector and pull it out.

 

Parameters of HID xenon lights (Digital *5w ballasts + German Technology bulbs)

A: Color Temperature: ***0K; ***0K; ***0K; ***0K;***0K ****0K;

****0K ;****0K;****0K
B: Output: *5 Watt 
C: Starting Voltage: *3 KV 
D: Lumen: ***0LM 
E: Life: ***0 Hours 
F: AS for H4 Hi/Lo lamps, the ray axis can be control forward and

backward for 4 mm, and up and down for 1.2 mm. 
G: Model available:

 Single beam:H1,H3,H7,H**1,*****1,***5,***6,*****1,H***1, H8, H9,

H*0, H*1, **0/**1, ***2

 Bixenon hi/lo beam:H4 H/L, ***4/***7 H/L, H*3 H/L

 Xenon*halogen bulb:H**2, ***4/*****2, H***2

A complete set of HID conversion kits includes: 
   A: Two pieces of lamps; 
   B: two ballasts,; 
   C: all accessories: (a. Relay and fuse box 1 piece. b. Cable 1 set; c.

Metal plate 2 pieces; d. Cable tie *0 pieces; h.   Screw (A) 4 pieces;

Screw (B) 4 pieces; Screw nut 4 pieces ; Washer 4 pieces Double-face

tape:8 pieces.) 
  D: Installation Instruction Manual, warrantee card. 
  E: For H4 H/L:a piece of power harness. 

key words:hid,hid kit,hid light, hid projector light, hid conversion kit

Pays: China
N ° de modèle: hid projector lights
Prix FOB: 30 ~ 50 / Set Obtenir le dernier prix
Localité: Guangdong, China (Mainland)
Prix de commande minimale: 30 per Set
Commande minimale: 10 Set
Packaging Detail: soft/hard/netural/aulminum case, etc.
Heure de livraison: next day for sample dispatch and whthin 3 days for
Capacité de Fournir: 50000 Set per Month
Payment Type: PayPal, Western Union, L/C, T/T
Groupe de produits : HID PROJECTOR LIGHT

Send a direct inquiry to this supplier

To:

Cherry-candicemo < Guangzhou Matec Electronic Co.,Ltd >

Je veux savoir: