Prix FOB
Obtenir le dernier prix50 ~ 80 / Set
|10 Set Minimum Order
Pays:
China
N ° de modèle:
3GQO
Prix FOB:
50 ~ 80 / Set Obtenir le dernier prix
Localité:
Guangdong, China (Mainland)
Prix de commande minimale:
50 per Set
Commande minimale:
10 Set
Packaging Detail:
Soft/hard magnetic/aluminum box
Heure de livraison:
within 3 days
Capacité de Fournir:
60000
Payment Type:
PayPal, Western Union, T/T
Groupe de produits :
Personne àcontacter Cherry-candicemo
Address:No.1 Yinlandong Rd,Xiejiazhuang,Taihe Town,Baiyun Distric, Guangzhou, Guangdong
First: Open the trunk
Second: Remove the negative cable from the battery using the *0mm
wrench. To get at it you have to remove the panel on the drivers
side that holds the first aid kit. Most US cars do not have the
kit so it’s just empty inside. You will see a cutout in the trunk
liner, give it a tug and you will have access to the rear of the
taillight.
Remove ONLY the connector with the 4 large wires. You remove the
connector by pulling back on the green tab and pulling the
connector out. Some pliers used gently helps on this. You can see
the upper *0mm nut in this photo. After removing the upper and
lower *0mm nuts you can now pull out the taillight. You will have
a hole in your car like this. To install the new light simpily
insert it into the hole and snug down the *0mm nuts. DO NOT
OVERTIGHTEN. They only need to be snug. Do not re-install the
wiring harness. Do the same to remove and install the passenger
side. You will be looking at something like this. To remove the
harness squeeze on the tabs on each side of the connector and
pull it out.
Â
Pays: | China |
N ° de modèle: | 3GQO |
Prix FOB: | 50 ~ 80 / Set Obtenir le dernier prix |
Localité: | Guangdong, China (Mainland) |
Prix de commande minimale: | 50 per Set |
Commande minimale: | 10 Set |
Packaging Detail: | Soft/hard magnetic/aluminum box |
Heure de livraison: | within 3 days |
Capacité de Fournir: | 60000 |
Payment Type: | PayPal, Western Union, T/T |
Groupe de produits : | HID PROJECTOR LIGHT |