Prix FOB
Obtenir le dernier prix3 ~ 5 USD / Kilogram ( Negotiable )
|1000 Kilogram Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
3 ~ 5 USD / Kilogram ( Negotiable ) Obtenir le dernier prix
Localité:
binzhou china
Prix de commande minimale:
3 per Kilogram
Commande minimale:
1000 Kilogram
Packaging Detail:
-
Heure de livraison:
3says
Capacité de Fournir:
100000 Kilogram per Month
Payment Type:
L/C, T/T
Groupe de produits :
-
Personne àcontacter Mr. Li
Bincheng district, Dongying, Shandong
This is a hand wrapped heat shrinkable tape designed for
corrosion protection of straight pipes,
fittings,
bends, elbows and other irregular configurations.. When heated
the backing layer shrinks and the
adhesive flows and forms a reliable corrosion protection seal
onto metal and adjacent coating surfaces.
The Polyethylene Heat shrinkable Tape needs no primer nor patch
closure and reduces application time and labour costs.
2Â Structure
The specification of the tape consists of three layers,
Adhesive: butyl rubber based hot melt adhesive
Film backing: polyethylene
Interleaf:Antiadhesive Film Treated with Silicone
3 Features
After heating, formed corrosion protection seal
Strong backing provides outstanding waterproofing effect
High chemical resistance. resists impact, abrasion and
ultraviolet light.
Excellent resistance against cathodic disbondment, dielectric
breakdown.
Simple Application
4 Physical Properties
· Product Data Sheet Total Thickness:*0mil, *0 mil,*0 mil ,*5
mils.
· Width:*0,**0,**0,**0,**0,**0,**0 mm
· Length: *0 m
· Tensile Strength:*5 N/cm
· Elongation:**0%
· Adhesion Strength to pipe:*0 N/cm
· Application temperature: **0 **0 °C
· Temperature resistance:**0 °C - *0°C
· Shelf Life: *2 months
5Â Application
No Special skills, equipments, patch closure nor primer are
needed. Its superior flexibility provides easy and reliable
application for irregular configurations of fittings, bends and
elbows and small diameter of straight pipes.
Wrap spirally the tape over foreign matters-free and preheated
surface, beginning at least *5~*0mm (1~2 ) onto pipe coating.
Wrap the tape with enough tension to obtain conformability and
with minimum *0% of overlapping, while removing the release
liner. Warm the end part of the tape and press down firmly. Using
a torch, start at the edge of the tape and heat circumferentially
around the coated pipe.
Finish off by heating over the entire tape vertically to ensure a
uniform adhesion and by using a roller or gloved hands to remove
wrinkle and air.
Â
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 3 ~ 5 / Kilogram ( Negotiable ) Obtenir le dernier prix |
| Localité: | binzhou china |
| Prix de commande minimale: | 3 per Kilogram |
| Commande minimale: | 1000 Kilogram |
| Packaging Detail: | - |
| Heure de livraison: | 3says |
| Capacité de Fournir: | 100000 Kilogram per Month |
| Payment Type: | L/C, T/T |
| Groupe de produits : | - |
