Prix FOB
Obtenir le dernier prix800 ~ 1350 USD / Metric Ton ( Negotiable )
|10 Metric Ton Minimum Order
Pays:
China
N ° de modèle:
-
Prix FOB:
800 ~ 1350 USD / Metric Ton ( Negotiable ) Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
800 per Metric Ton
Commande minimale:
10 Metric Ton
Packaging Detail:
According to customer's request
Heure de livraison:
Within 7-15days after receiving deposit
Capacité de Fournir:
500 Metric Ton per Month
Payment Type:
L/C, T/T
Groupe de produits :
Personne àcontacter Sales1
No.9 Ruijin road, Licang district, Qingdao, Shandong
 Â
HDPEÂ Â High Density Polyethylene
Â
1.Introduction
HDPE has several properties that make it ideal as a packaging and manufacturing product. Its stronger than standard polyethylene, acts as an effective barrier against moisture and remains solid at room temperature. It resists insects, rot and other chemicals. It is easily recyclable and can be used again and again. Recycled HDPE creates no harmful emissions during its production or during its use by the consumer. Also, HDPE leaks no toxic chemicals into the soil or water.
Â
HDPEÂ is one of the most commonly used plastics in the world. It is typically found in milk jugs, plastic bags and refillable plastic bottles. In addition to plastic lumber and recycled plastic furniture, recycled HDPE is used to manufacture lawn and garden products, buckets, crates, office products and automobile parts.
Â
2.Grade
HDPE pipe grade can be used in the production of pressure pipes, such as pressurized water pipes, fuel gas pipelines and other industrial pipes.Â
HDPE Injection grade, red, blue, green,Â
HDPE Blow grade, white, grey, blackÂ
HDPE Pipe Grade black pelletÂ
HDPE coating grade
And So On
Â
3.Specification
|
HDPE cable material Property |
Typical Value |
|
|
Mass density g/cm 3 |
0.941-0.959 |
|
|
Melt flow Rate(190 centidegree /2.16kg)g/10min |
≤1.0 |
|
|
Tensile yield strength MPa |
≥19.0 |
|
|
Flexural modulus Mpa |
≥965 |
|
|
*@******************** |
≥400 |
|
|
Impact Embrittlement temperature centidegree |
MAXÂ -118 |
|
|
Dielectric Constant |
100KHZ |
2.32 |
|
1MHZ |
2.31 |
|
|
Loss Tangent |
100KHZ |
MAXÂ 0.0001 |
|
1MHZ |
MAXÂ 0.0001 |
|
|
Volume resistivity OHM-CM |
MINÂ 1x10Â 15 |
|
Â
Â
4.Products Properties
High density polyethylene for non-toxic, tasteless, no smelly white particles, melting point is about 130 °C, relative density of 0.941 ~ 0.960. It has good heat resistance and cold resistance, chemical stability, but also has high rigidity and toughness, good mechanical strength. Dielectric properties, environmental stress cracking resistance sex also is good.
Â
5.Storage:
Shelf life: It should avoid damp, contaminated and direct sun
light during transport.And should be stored in ventilated and dry
place. Do not put it with flammable and corrosive substances
together,and away from the fire.
| Pays: | China |
| N ° de modèle: | - |
| Prix FOB: | 800 ~ 1350 / Metric Ton ( Negotiable ) Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 800 per Metric Ton |
| Commande minimale: | 10 Metric Ton |
| Packaging Detail: | According to customer's request |
| Heure de livraison: | Within 7-15days after receiving deposit |
| Capacité de Fournir: | 500 Metric Ton per Month |
| Payment Type: | L/C, T/T |
| Groupe de produits : | plastic raw materials |
