La description
gypsum board production equipment introduction Paper Supply System
Introduction　 The system has a unique way with the precision of
paper and corrective institutions, superadd the notches played a
great help on the subsequent trim and form. Product quality can be
greatly improved, and reduce a lot of unnecessary waste and reduce
costs. For Powder System Introduction The system is unique
quantitative feeder as the core, so that the supply of gypsum
powder very accurate, for the subsequent mixing operation provides
great convenience, coupled with the pneumatic discharge device, so
that the supply of feed powder has a reliable guarantee. Water
Supply System Introduction The system uses a heat exchanger, above
the quality of the product not only enhance the strength, but also
saving energy, using more accurate measurement of the specific pump
water for the operation to provide a great convenience. Foam System
Introduction The system uses a unique constant pressure air supply
device, a dedicated pump for the foam liquid, so that liquid foam
into the slurry can be uniform for the operation provides a great
convenience, and thus to adjust the weight of the product is
relatively easy to grasp. Molding System Overview This system
introduces the technology from foreign, use a unique strong edge of
stainless steel vertical mixer with special stainless steel
pneumatic plate forming machine, so that the system enhanced the
ability of anti-wear greatly and extended service life. It adopts
Plate Form Machine instead of The original Lamination, then improve
the flatness of the plate surface. Conveyor System Introduction In
addition to the traditional conveyor machine, also increased the
waste plate cleaning machine, not only reduces the labor intensity
, but also enable the plant sanitation and clean. Transfer System
Introduction The system adopts the most advanced non-powered
fast-forward into the body panels to reduce energy consumption, and
the various parts of the total made a corresponding improvement, so
that the machine run more reliable. Drying System Introduction This
system is the core of the entire production line, which directly
affects the production line output and energy consumption. This
system uses a unique heat sink structure, floor temperature,
temperature control section, superadd the new and unique air
distribution system that allows the system of arbitrary adjustable
temperature and humidity levels, which played a role in reducing
energy consumption and to make the operation of the system is more
easy to grasp. It’s also the key to reducing test costs. Heating
System Introduction The system uses machine-heat carrier furnace
(heat Oil Furnace), which is a low-pressure high-temperature
heating device. It is coal, oil and gas as fuel to oil as carrier,
is currently the preferred heating gypsum board production
equipment. In addition, the use of flue gas heat exchanger to
reduce energy consumption and reduce costs. Length System
Introduction The system with unique shutter machine and palletizing
unit became the latest cut to length system, thus ending the
history of artificial access panels, reducing labor costs. Dust
Removal System Introduction The system uses electronic pulse bag
filter to improve the effectiveness of the Chu Chen, and the other
an increase of dust auger, to make it easier clean-up dust. Control
System Introduction Control system consists of six aspects of
composition, using a computer programmed control, and using an
inverter, solid state relays, photoelectric sensors, non-contact
devices to ensure reliable operation of the machine. Capable of
achieving long-term operation of the automatic gypsum board
production line. Attachment: Computer automatic control system for
transit Photoelectric sensors to detect - dedicated PLC control -
Solid State Relay Drive Computer control system for automatic
Length Photoelectric sensors to detect - dedicated PLC control -
Solid State Relay Drive Forming a computer control system A variety
of sensors to detect - dedicated PLC control - inverter drive
Computer control system of drying room Temperature and humidity
sensors to detect - dedicated PLC control - contact Driver Hot Oil
Furnace Control System Auto-detection - operation - relay
control - contact Driver
| Pays: |
China |
| N ° de modèle: |
It can produce many specifications
|
| Prix FOB: |
(Negotiable)
Obtenir le dernier prix
|
| Localité: |
- |
| Prix de commande minimale: |
- |
| Commande minimale: |
1 FCL |
| Packaging Detail: |
- |
| Heure de livraison: |
- |
| Capacité de Fournir: |
- |
| Payment Type: |
- |
| Groupe de produits : |
- |
