Prix FOB
Obtenir le dernier prix|
1 Set Minimum Order
Pays:
China
N ° de modèle:
GSK988T
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Set
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
60000 Set per Year
Payment Type:
T/T, Western Union, PayPal
Groupe de produits :
China
Personne àcontacter Kinder
Guangzhou, Guangdong
GSK**8T is a new CNC controller for slant bed CNC lathe and turning
center, adopt micro processor of **0MHz high performance, and it
can control five feeding. Axes (including C axis), two analog
spindles, real-time communication between GSKLink serial bus and
servo unit, the adapted servo motor adapts encoder ofAbsolute type
in high resolution, realize position of 0.1um, and satisfy the
requirements of combined processing of turning and milling in high
precision.
GSK**8T is equipped with internet interface, and it supports remote
monitor and file transmission and satisfies the requirements of
internet education and
Workshop management. GSK**8T is the best choice for slant bed CNC
lathe and turning center.
Characteristics:
*-Five feeding axes(including C axis), any three axes linkage, two
analog spindles, support combined processing of turning and
milling.
*-Command unit: 1um or 0.1 um is selected, maximum speed is
*0m/min, when it is 0.1 um, and the maximum speed is *4m/min.
*-Adapted with servo unit of GSKLink, and realize servo parameter
reading and writing and servo unit real-time monitor.
*-Through serial bus, it can extend I/O unit and GSKLink axis.
*-Built-in many PLC programs, PLC ladder diagram is edited on-line,
real-time monitor.
*-Background edit part program.
*-Equipped with internet interface, support remote monitor and file
transmission.
*-With USB interface, it supports file operation, system
configuration and software upgrade in flash disk.
*-With 8.4 inch true color LCD, it support two-dimensional traverse
path, display in stereogram.
Technical Specification
Control axes
*-Maximum axes: Five axes (including C axis)
*-Maximum linkage axes: Three axes
*-Number of PLC control axes: Five axes
*-Number of GSKLink axes: Two axes
Feeding axis function
*-Minimum command unit: 0.**1mm or 0.***1mm is selected.
*-Position command range: ± *******9 x minimum command unit.
*-Rapid traverse unit: When the command unit is 0.**1mm, the
maximum speed is *0m/min.
When the precision is 0.***1mm, the maximum speed is *4m/min.
*-Rapid override: Total four levels: F0, *5%, *0% and **0%,
real-time adjusting.
*-Feeding override: Total *6 levels: 0~**0%, real-time
adjusting
*-Interpolation mode: Linear, arc, spiral and polar coordinate
interpolation and rigid tapping.
Thread function
*-Common thread (following the spindle)/ rigid thread.
*-Single-headed/multiple thread of straight, taper and terminal
surface in metric system/inch system, equal and variable pitch
thread.
*-Thread retraction length, angle and speed characteristics can be
set.
*-Thread pitch: 0.*1mm~**0mm or 0.*1inch~9.*9inch.
Acceleration and deceleration function
*-Cutting feeding: Linear type or index type is selectable.
*-Rapid traverse: Linear type.
*-Thread cutting: Linear type or index type is selectable.
*-The starting speed, finishing speed and time of acceleration and
deceleration are set by the parameter.
Spindle function
*-Analog voltage 0V~*0V output in two channels, spindle encoder
feedback in two channels and two-spindle control.
*-Spindle speed: It is set by S code or PLC signal, the speed range
is 0rpm~*0, **0rpm.
*-Spindle override: Total 8 levels: *0%~**0%, real-time
adjusting.
*-Spindle constant surface speed control.
*-Rigid tapping.
Tool function
*-Tool length compensation.
*-Tool wearing compensation.
*-Tool nose radius compensation (C type)
*-Tool life management.
*-Methods of setting tools: Tool-setting in fixed position, trial
cutting tool-setting, return to reference point for setting
tool
*-Tool offset mode: Rewriting coordinate mode, tool traverse
mode
Precision compensation
*-Backlash compensation
*-Pitch error compensation in memory type.
| Pays: | China |
| N ° de modèle: | GSK988T |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Set |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | 60000 Set per Year |
| Payment Type: | T/T, Western Union, PayPal |
| Groupe de produits : | CNCmakers |
