Prix FOB
Obtenir le dernier prix|
- Minimum Order
Pays:
China
N ° de modèle:
A108
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
-
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
-
Payment Type:
-
Groupe de produits :
-
Personne àcontacter monica
longhua, Shenzhen, Guangdong
The Tech*2
is the same tester GM Technicians use to diagnose GM vehicles.
The Vetronix Tech 2 comes with Authentic GM software and provides
support for on-board diagnostics on all GM systems ***2 thru
***0
Features:
Authentic GM software in the Tech 2 Flash means the most
comprehensive diagnostic software available for late model GM
vehicles.
Support for on-board diagnostics on all GM systems ***2 thru
current year.
Removable hardware modules provide insurance against scan tool
obsolescence.
Large, easy-to-read backlit screen.
RS**2 & RS**5 ports provide the avenue to connect future
devices to your Tech 2 Flash.
Ability to capture stored DTCs, Freeze Frame, and Failure Record
for later review.
Ability to view the status of vehicle diagnostic tests as they
run.
Bi-directional
The authentic GM ****-current year software will provide full
bi-directional control when performing power train, chassis, and
body diagnostics.
Vetronix Tech*2
Specifications
Dimensions
 *2" X 6" X 2"
Microprocessor
 *2 bit, *6 MHz
Memory
 *2 MB flash type II PCMCIA. Type III slot available for
future expansion.
Communications
 Integral RS**2 communication port.
Screen
 3.8" X 2.8" backlit monochrome with full graphics
capability: **0 X **0 pixels. Displays up to 9 vehicle parameters
at once
GM Tech*2 Starter Kit with Candi Module Kit includes (All
ORIGINAL and NEW!):
Tech*2 Flash
Tester
*2 MB PCMCIA Card with GM OE Applications
CAN diagnostic interface module(CANdi) and instruction sheet
download ( **9.2 kb )
Data/Sensor/Trouble Code Manual
DLC Cable, DLC Loopback Adapter
*2V Cigarette Lighter Power Cable
SAE *6/*9 Adapter
NAO *2/*9 Adapter
Battery Power Cable
Storage Case
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun. In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the Tech 2 Flash and a CAN diagnostic interface module. The module connects between the Tech 2 Flash's diagnostic link cable and the OBD adapter. Once the module is connected, it can be used on all GM vehicle applications, even those vehicles using other platforms such as OBD I and OBD II.
Â
Pays: | China |
N ° de modèle: | A108 |
Prix FOB: | Obtenir le dernier prix |
Localité: | - |
Prix de commande minimale: | - |
Commande minimale: | - |
Packaging Detail: | - |
Heure de livraison: | - |
Capacité de Fournir: | - |
Payment Type: | - |
Groupe de produits : | - |