Prix FOB
Obtenir le dernier prixUSD
|1 Ton Minimum Order
Pays:
China
N ° de modèle:
K11
Prix FOB:
Localité:
-
Prix de commande minimale:
-
Commande minimale:
1 Ton
Packaging Detail:
-
Heure de livraison:
-
Capacité de Fournir:
500TON/DAY
Payment Type:
-
Groupe de produits :
Personne àcontacter Mr. Kevin
Panyu, Guangzhou, Guangdong
Flexible Waterproofing Coating Apply on exterior surface of wall, roof, bathroom, kitchens, pools, etc. Features 1. Single component, cement-mixed emulsion 2. Excellent resistance to light shake and crack 3. Excellent resistance to weathering, aging and corrosion 4. Long term water resistance and good durability 5. Super elastic and flexible 6. High strengh of bond, excellent in whole waterproof 7. Resistance to positive and negative pressure 8. Non-toxic Surface preparation The solid substrate should be clean, dry and free of oils, grease, wax, latex compounds, curing compounds, dust and all foreign matter. Application 1. It is recommended to use low cycled(**0r/min)electrical mixer in order to make the mortar homogeneous. 2. This slurry is applied using a brush, broom or spray machine. Ensure the material is thoroghly mixed before applying. 3. Waterproof slurry is applied in two layers. The second layer is applied *0 minutes after application of the first layer in the opposite direction(for example, the second layer should be applied in horizontal direction if the first layer is applied in vertical direction) while the first is still green. In no instance should the total thickness exceed 5mm. 4. It should be applied with using a brush, broom or spray machine. Ensure the material is thoroughly mixed before applying. 5. Before applying further coatings, e. G. Renders, tile adhesive etc. On waterproof slurry, allow it to fully cure and the ceramic tiling application may start min. *4 hours after application of it. Precautions 1. flex polymer waterproof slurry should not be directly exposed to water or sunlight for *4 hours. 2. Do not add water, cement, or sand to this two component mixture. 3. The application cannot be conducted below 5; Do not apply it in the extremely wet and bad-ventilated surroundings so as to affect the formation of the waterproof film.
| Pays: | China |
| N ° de modèle: | K11 |
| Prix FOB: | Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | - |
| Commande minimale: | 1 Ton |
| Packaging Detail: | - |
| Heure de livraison: | - |
| Capacité de Fournir: | 500TON/DAY |
| Payment Type: | - |
| Groupe de produits : | Waterproofing Coating |
