Prix FOB
Obtenir le dernier prix10 ~ 1000 USD / ( Negotiable )
|1 Piece Minimum Order
Pays:
China
N ° de modèle:
KAXITE
Prix FOB:
10 ~ 1000 USD / ( Negotiable ) Obtenir le dernier prix
Localité:
Made in China
Prix de commande minimale:
10
Commande minimale:
1 Piece
Packaging Detail:
Western Union, T/T
Heure de livraison:
around 30days
Capacité de Fournir:
10000 Piece per Month
Payment Type:
PayPal, Western Union, D/P, T/T
Groupe de produits :
Personne àcontacter Mr. Kevin
No.134, Huancheng North Road, Jiangbei District, Ningbo, China, Ningbo, Zhejiang
Flange Insulation Kits are the most widely used form of
controlling losses due to corrosion.
They can be used to control stray electric currents in piping at
oil, gas, water, refinery, and chemical plants,
to increase the effectiveness of cathodic protection systems and
confine or eliminate electrolytic corrosion. Â
Gasket Type:
TYPEÂ E
TYPE F
TYPE D
SEAL TYPE O
Specify The Following:Â
*Â Specify Flange Size and Pressure
Rating
*Â Specify Gasket Type: D, E, or F.
*Â Specify Gasket Sealing Element, Sleeve and Washer
Material.
Insulation Gasket Types:
Â> Type E Gasket;
Â> Type F Gasket.
ÂDescriptions:
ÂType E Gasket:
ÂÂ
 is a full face flange gasket, it's for FF Gasket with same out diameter asthe full face flange and precision cut bolt holes.
ÂIt is designed facilitates proper alignment of the gasket during installation.
ÂThis assembly minimizes the ingress of conductive foreigh matter between the portions of the flanges, outer side the rase face and reduces the risk of bridging.
ÂType F Gasket:
ÂÂ
 are made to fit the raised face protion of the
flang only.
As there are no bolt holes in this F type gaskets, the out diameter of the gasket fit tightly into place assuring a well centered position.
Â
Verify that the installation kits contain
the material specified and the contents are
not damaged.
*Clean and inspect pipe flange faces and apply
lubricant to all threads.
*Install the gasket and align the flanges so the
bolt holes will be centered.
*Use alignment pins in two diametrically opposite
bolt holes whenever possible to assure proper alignment of
flanges and gasket.
*Insert insulating sleeves into the bolt holes taking care
not to use force which could damage the sleeve
material.
*
 Tighten two diametrically opposite bolts to 30%
to total torque.
*
 Tighten all bolts to 50%, then to 100% of final
torque value.
*Â of sufficient length to extend through the
nut approximately 1/4".
| Pays: | China |
| N ° de modèle: | KAXITE |
| Prix FOB: | 10 ~ 1000 / ( Negotiable ) Obtenir le dernier prix |
| Localité: | Made in China |
| Prix de commande minimale: | 10 |
| Commande minimale: | 1 Piece |
| Packaging Detail: | Western Union, T/T |
| Heure de livraison: | around 30days |
| Capacité de Fournir: | 10000 Piece per Month |
| Payment Type: | PayPal, Western Union, D/P, T/T |
| Groupe de produits : | Gaskets |
