Prix FOB
Obtenir le dernier prix( Negotiable )
|500 Square Meter Minimum Order
Pays:
China
N ° de modèle:
FG-AL
Prix FOB:
( Negotiable ) Obtenir le dernier prix
Localité:
CHINA
Prix de commande minimale:
-
Commande minimale:
500 Square Meter
Packaging Detail:
Carton and pallet
Heure de livraison:
Depend on quantity
Capacité de Fournir:
2000 Square Meter per Day
Payment Type:
T/T, L/C
Groupe de produits :
Personne àcontacter James
Baqie Industrial Zone, Baoding, Hebei
FIBERGLASS MESH FILTER FOR MOLTEN ALUMINIUM FILTRATION
Fiberglass mesh filter for molten aluminium filtration are specially designed and woven for the diffusion and filtration of aluminium.High twisted yarns are used to control strand diameters and resist flattening or distortion under pressure from contact with molten metal. The integrity of the weave pattern is maintained by the use of phenolic resin, and by the use of leno construction in high density. The production facility is ISO ***1 approved and tests are run on each batch for loss on ignition, rigidity, and hole size.
FEATURES & BENEFITS
1.Brings down the casting rejection rate due to slag inclusions to
less than 3%.
2.Cheap and cost effective,easy installation.
3.Compared to galvanized metal mesh, it will not change molten
metal composition.
4.Stay away from molten aluminium and easy to handle the aluminum
scrap recycling (Fibeglass mesh can float on top of the molten
metal when the metal is recycled and can be scooped out), this can
greatly reduce
cost.              Â
5.Reduces molten metal turbulence,improves molten metal
distribution and
flow.               Â
6.Produces minimal odor and smoke.
7.Remove oxides and inclusions to improve castings mechanical
properties and surface finish.
8.Excellent stiffness and toughness,good impact resistance.
9.Mesh and grid is well organized and highly integrity
MAIN APPLICATION:
Automobile or motorcycle wheel rims,aluminum cylinder,aluminium
pistons,rods,ingots,aluminum and alloy precision castings.
SPECIFICATIONS:
Density:**0g/m2
Mesh size:0.**2.5mm
Porosity:*5%
SiO2:above *8%
Thickness:0.*5mm
Application:Aluminium and alloy casting
Working Temperature:******0 Degree C
Soft Point:**0 Degree C
Continuous Working Time:below *0 minutes
Tensile Strength (N/4ends):above 6
Weave type:Leno
Gas emit(cm3/g):below *0
PACKING:
1.Standard pre-cut sheet size: **0×**0mm.Other sizes and shapes are
available upon request.
2.The Max.width can be **0mm and length *0meters or **0meters in
roll.
3.There are many special treated shapes like cap or hat,tube,funnel
etc..as per different
application.     Â
| Pays: | China |
| N ° de modèle: | FG-AL |
| Prix FOB: | ( Negotiable ) Obtenir le dernier prix |
| Localité: | CHINA |
| Prix de commande minimale: | - |
| Commande minimale: | 500 Square Meter |
| Packaging Detail: | Carton and pallet |
| Heure de livraison: | Depend on quantity |
| Capacité de Fournir: | 2000 Square Meter per Day |
| Payment Type: | T/T, L/C |
| Groupe de produits : | Fiberglass mesh filter |
