Prix FOB
Obtenir le dernier prix420 ~ 820 / Set
|1 Set Minimum Order
Pays:
China
N ° de modèle:
1WG
Prix FOB:
420 ~ 820 / Set Obtenir le dernier prix
Localité:
-
Prix de commande minimale:
420 per Set
Commande minimale:
1 Set
Packaging Detail:
iron hide
Heure de livraison:
10 to 15 days
Capacité de Fournir:
1000 Set per Year
Payment Type:
T/T, L/C
Groupe de produits :
Personne àcontacter Ms. Alice
Shandong yishui the north industrial park, Linyi, Shandong
  Mini tiller is the new product in order to meet
the needs of the masses users, with reference to the lasted
machine. The product produced strictly with the GB/T*********4
standard production and the IS****1. The product has specific
reasonable structure, superior performance, convenient and
flexible, good reliability, long life and other advantages. The
tiller can works in plains, hills, mountains for rotary tillage
fertilizing farmland homework, but not suitable for rocky
land.
   Mini tiller driven by
dynamic host and rotary cultivator, supporting power is basic
diesel engine, gasoline engine. The user can also match other model
diesel engine according to the actual need not greater than the
specified value.The machine
has simple compact structure, light weight, flexible and convenient
operation and reliable, maintenance convenience, good traveling
capability.
Â
Scope of
applications
This machine can works in plain, hills,
mountains, in upland and paddy fields, tea plantations, orchards,
flower and vegetable greenhouses and small land area carries on the
demand of the rotary tillage soil preparation and so on, you can
choose different matching machine according to the needs of
production field operations.
The operation methods:
 (a)  run - in
method
1 Before the break-in
method
In order to extend the service life, you should
get trial operation before using, be sure to try first to get up to
speed. Tighten connection of components, charge sufficient fuel
oil, lubricating oil and water, check and adjust the v belt
tension. Check the tire pressure and the working condition of the
handle.
 2 Basic principles:
 From low to high speed, load from small
to large
3 The purpose of the
break-in:
 In good technical conditions and the
conditions of lubricating oil is as follows, by slowly increasing
load, and gradually to the surface of the parts with grinding
uneven parts, for the normal use of micro tillage machine and
prolong service life.
 4 Break-in matters needing
attention
(1) First do some braking and steering test,
check the operating mechanism is working
correctly.
(2) After the break-in, strike hot oil off the
bottom of the pan. Cleaning the oil pan and parts in the
lubricating oil system, the filter, and then add new oil, add right
amount diesel, no load running in low speed a few minutes to wash
and remove iron filings grinded down.
(3) Check the nut and fasten up all the screws
under the cylinder head and other nuts, screws.
(4) Check and adjust the valve clearance, a
free travel of clutch and brake.
(5) The mini tiller also need the running-in
after overhaul, but perform half.
(b) The details of operation:
Check the lubricant before preparation and
installation, according to the requirements of the instructions,
diesel oil, cooling water and gearbox lubricant.
 1 check the tire pressure whether in line
with the requirements.
 2 check whether the main parts of bolt
fastened (focusing on frame, drawing frame and the gearbox housing,
driving wheel and other connection parts).
 3 the clutch handle in the "off"
position, the gear lever in the neutral position, the throttle
lever in "start" position, the throttle switch on: "open"
position.
 4 decompression, machine-cleaned pulled,
started in the engine specification of diesel
engine.
 5 To start up
 (1) check whether the left and right
steering gear is reliable joint (inspection methods: don't hold
the hand, swinging arm, when micro tillage machine can not rotate,
means gritting steering wheel sets have joint)
 (2) diesel engine starts, leave off the
clutch, shift lever to the required gear.
 (3) step on the gas can also use the
small throttle (no load), relax the clutch handle, slowly and
steadily to the "close" position, the mini tiller
starts.
 (4) First slow the clutch, then
immediately began after the combination, in order to reduce the
clutch slippage and the wear and tear.
 6 The choice and transformation of
gear
(1) in the farming field , choose at most I and
II gear, otherwise will cause overload, which affects the service
life of it.
 (2) In order to shift to the top speed,
first you must separate the clutch, then shift lever to the
required gear.
 (3) For shifting from low to top speed,
should first step on the gas to increase speed then shift the gear,
from top to low gear, should reduce the speed again after the shift
to make sure smooth driving and avoid damage to the
gear.
 7 Direction changing
3
(1) reduce the throttle
 (2) in flat road and slope, the machine
will turn left when we handle left and turn right when handle
right.
 (3) When descend the slope, should
operate the opposite way. Namely, it will turn right when handle
the left hand and turn left when handle the right
direction.
 8, Backward
  Put the clutch to *7 "off"
position, shift lever in reverse *8 position, then slowly and put
down the clutch to the "close", the mini tiller will backward. At
this point is easy to use small throttle.
 *0 Parking and braking
 (1) Put the clutch to the "off" position,
the gear lever in high speed position, gradually decreasing to
throttle 3, parking can be implemented. After parking handle clutch
brake *5 back on the "close" position, During the long winter, must
take out all cooling water and keep it outdoor and cover the
exhaust pipe in case of rain water; cover the triangle in summer
noon in case of thermal deformation and aging.
 (2) The mini tiller parking but not stop,
you should handle the clutch brake level to *7 in "brake"
position.
 (3) Brake single brake, turn down the
gas. 3, quickly put on the clutch brake lever handle *7 "brake"
position; use the trailers brake if have the trailer, forbidden to
use chassis brake. Generally, don't stop on the ramp. If must,
should shut down shift, put triangular under laying the wood
tire.
 *1 Driving under special
conditions
 (1) The transverse slope tillage lower
speed, roller wide-track appropriately and try not to be turning in
the direction of uphill.
 (2) Night work. In advance, familiar with
tillage area topography and have good lighting. At the same time,
the driver must have enough sleep before.
 (3) How to pass through sideways: you
must pass channel in low speed sideways. If must go through
straight you should slowly down and pass without
dash.
 *2 Normally, you should use first gear,
but you can use second gear when working in paddy field with less
load. Make sure do much weeds on the coulter or will increase parts
consumption and loss of power. Shut down the throttle while take
away weeds. Clutch handle in off position and screw off the rotary
tillage separation claw, keep in separation and use the hook to get
weeds away.
Â
| Pays: | China |
| N ° de modèle: | 1WG |
| Prix FOB: | 420 ~ 820 / Set Obtenir le dernier prix |
| Localité: | - |
| Prix de commande minimale: | 420 per Set |
| Commande minimale: | 1 Set |
| Packaging Detail: | iron hide |
| Heure de livraison: | 10 to 15 days |
| Capacité de Fournir: | 1000 Set per Year |
| Payment Type: | T/T, L/C |
| Groupe de produits : | farm machinery |
