La description
About Nylon Sheet & Rod:
The most common engineering nylons are PA6 and PA*6. Nylon stock
shapes are produced by either extrusion or casting. The process is
in part a determinant of the nylon properties of the end product.
Modifiers are added to enhance desirable characteristics.
Advantages:
Nylon Rod and Nylon Sheet are tough, durable, general purpose
engineering material with special grades for specialty
applications. Typical application conditions would be medium speed
and temperature in a rugged, abrasive, impact and high load
environment.
Disadvantages:
Poor dimension stability, electrical and mechanical properties, may
become affected by absorbing moisture or water, acidproof ability
not good, can't dye with acid or touch overmuch acid, weak
lightfastness, low endurance in pollution
Key Features:
- Excellent bearing properties
- High impact strength and toughness
- Low power factor requirements
- High wear resistance
- Very good sliding properties
Applications:
- High load bearings
- Wear pads
- Support and Guide wheels
- Conveyor and Tension rollers
- Wire rope sheaves
- Buffer pads
- Gears, etc.
Nylon Products:
- Extruded Nylon 6 (PA 6) - natural (white) / black:
Offers an optimal combination of mechanical strength, stiffness,
toughness, mechanical damping properties and wear resistance. These
properties, together with a favourable electrical insulating
ability and a good chemical resistance make extruded nylon 6 a
"general purpose" grade for mechanical construction and
maintenance.
- MC Nylon 6 (PA 6) - natural (ivory) / black:
Unmodified cast nylon 6 grade exhibiting characteristics which come
very close to those of nylon *6. It combines high strength,
stiffness and hardness with good creep and wear resistance, heat
ageing properties and machinability.
- MC Nylon 6 + oil filled (PA6 + oil) - green:
This internally lubricated cast nylon 6 is self-lubricating in the
real meaning of the word. Oil filled MC nylon 6, especially
developed for unlubricated, highly loaded and slowly moving parts
applications, yields a considerable enlargement of the application
possibilities of nylons. This because of its reduced coefficient of
friction (up to **0%) and improved wear resistance (up to x
*0).
- Nylon 6 + MOS2 (PA6 + MOS² ) - grey black:
The addition of MOS² Renders this material somewhat stiffer, harder
and dimensionally more stable than nylon *6, but results in some
loss of impact strength. The nucleating effect of the molybdenum
disulphide results into an improved crystalline structure enhancing
bearing and wear properties.
- Nylon 6+ GF*0 (PA *-GF*0) - black:
When compared with virgin nylon 6, this *0% glass fibre reinforced
and heat stabilised nylon grade offers increased strength,
stiffness, creep resistance and dimensional stability whilst
retaining an excellent wear resistance. It also allows higher max.
Service temperatures.
- Nylon *6: This material with a higher mechanical strength,
stiffness, heat and wear resistance than extruded nylon 6. It also
has a better creep resistance but its impact strength and
mechanical damping ability are reduced. Well suited for machining
on automatic lathes.
Key Words:pa6 sheet, pa6 rod,nylon 6 sheet, nylon 6
rod, polyamid sheet, polyamid rod, pa6 board, pa6 plate, nylon
board, nylon plate, pa6 bar, nylon 6 bar, poliamid bar, polyamide
sheet, polyamide board, polyamide plate, polyamide rod, polyamide
bar, mc nylon sheet, mc nylon rod, Oil filled nylon sheet, oil
filled nylon rod, *0gf nylon sheet, *0gf nylon rod.
| Pays: |
China |
| N ° de modèle: |
EG-PA6 Sheet
|
| Prix FOB: |
0 ~ 7.15 ( Negotiable ) (Negotiable)
Obtenir le dernier prix
|
| Localité: |
China |
| Prix de commande minimale: |
- |
| Commande minimale: |
500 Kilogram |
| Packaging Detail: |
International Standard Pallet |
| Heure de livraison: |
12 ~15 days |
| Capacité de Fournir: |
50 Ton per Month |
| Payment Type: |
T/T, Western Union, PayPal |
| Groupe de produits : |
Engineering Plastic
|
